0.4.4 Astlinux Stock i586 image but also had issues in 0.4.1 and 0.4.2. All installs are directly off the CD install.
2 different machines Via Pentium II MB with a 400Mhz CPU, 512M Ram, IDE drive, IDE KD Jetway 615 mini-ITX with 1.2 Celeron, 320M RAM, CF card, 1M jump drive KD Both systems used the same Digium TDM400 with 1 FXO module. I have a 2.8GHz box that filled in for the one week when I let the system sit on the JetWay. I used that temporary system to fill in for SIP calls and kept the PSTN out of the mix. This was a raw asterisk build on CentOS (not sure version). It only ran a week and I didn't see any problems, but I needed that machine for something else, so I rebooted the JetWay. Typically I can run for at least 2 weeks before I have to reboot it and putting a reboot in the cron script doesn't solve it. It does not seem to be a resources issue that way. It just seems to be some semi-frequent collection of events that triggers it. That has become the current recover steps (just reboot it). I am looking at a X10 controller with heyu to check the admin port. If not accessible bounce the pbx, but I should not have to run it this way. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Darrick Hartman Sent: Friday, December 01, 2006 2:35 PM To: Discussion of AstLinux - Asterisk on Compact Flash Subject: Re: [Astlinux-users] Troubleshooting 100% utilization Tony, I may have missed it earlier in the thread, but what version of Astlinux and which version of Asterisk? Did you build it or was this from an official release? What hardware? CPU/Motherboard Zap hardware Darrick _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
