Yes, I am using DNS lookups. I think that an issue to the Asterisk 1.2 base is important to the list, so I will elaborate.
I am wondering if this has to do with external timing. I believe that Asterisk gets its timing from ztdummy or the zaptel driver you have installed. I am not sure about mISDN, but I wonder if after a SIP call, that the timing doesn't get messed up in the system causing it to go into a tight loop somewhere. I would agree that the focus should be on the SIP channel just from when I have seen it occur. It would be interesting if someone had this problem on a SIP only box, because that would blow my theory. -----Original Message----- From: Kevin Kiely [mailto:[EMAIL PROTECTED] Sent: Thursday, November 30, 2006 4:54 PM To: [EMAIL PROTECTED]; 'Discussion of AstLinux - Asterisk on Compact Flash' Subject: Re: [Astlinux-users] Troubleshooting 100% utilization I believe this to be more of an Asterisk issue not specific to the Astlinux packaging so I will keep it short in respect to the mailing list. As most of our systems are PRI based this doesn't present itself that often. However, I have seen a similar issues with locations we have with SIP registrations on the 1.2 asterisk branch. Are you using any DNS lookups? _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
