If someone wants to send me a WRAP board I'd be happy to put it on my test rig.
Graham, who much are the Soekris boards in the UK? It's been a while since I was at home (I'm from Slough but live in the US now) so have no idea about hardware costs. It might be cheaper for me to sell you one and ship it over? FYI, I have my Soekris screwed to the wall of the laundry room along with all the mess that's the Cat5E install/FIOS/24 port switch/WiFi etc. Out of sight ... I dicovered that the vent holes in the Soekris case just happen to fit the brackets of a 1U rackmount but it kit and so I used a few self tapping screws to attach the rack ears and then screw the whole lot to the wall. Double sided tape works well for my WRAP monowall. Mark On Thu, 2006-12-21 at 11:40 -0500, Kristian Kielhofner wrote: > GRAHAM SIMM wrote: > > Cheers Kris. > > > > I currently have an Epia 5000 based system but the wife is complaining > > it's too big as it currently sits in the living room. I have been > > toying with the idea of getting a PCEngine 1E as I should easily be able > > to hide it from view so was just after a few thoughts on them. > > > > I did look at the Soekris but they are quite expensive in the Uk. > > > > Graham. > > > > Graham, > > I only mentioned the Soekris because there were published test results > for it and it is identical to the WRAP. > > -- > Kristian Kielhofner > _______________________________________________ > Astlinux-users mailing list > [email protected] > http://lists.kriscompanies.com/mailman/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to [EMAIL > PROTECTED] _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
