By the looks of it that setup shouldn't have a problem. You'll want to use A-law however as that's the native format of an E1. 400Mhz FSB will be more than enough. Asterisk is fairly scalable, though what you're describing is a walk in the park as far as Asterisk configurations go.
Regards, Bryce Chidester Rhino Equipment Corp. [EMAIL PROTECTED] Tel: +1 (480) 940-1826 x6351 Fax: +1 (480) 961-1826 FWD: 633686 x6351 IP: asterisk.rhinoequipment.com x6351 THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY MATERIAL and is thus for use only by the intended recipient. If you received this in error, please contact the sender and delete the email and its attachments from all computers. Erick Perez wrote: > VIA EPIA 1.2ghz / 1gb RAM / 80gb hdd / 256 CF card > > Many persons told me that it should run a 30 SIP ulaw hardphones with > a E1 PRI echo cancel PCI card on the available PCI slot going to the > PSTN. No call recording. Just PBX functions and MOH and Voicemail > without hitting a load of 5. > But the board has a 400mhz FSB, is that enough? > > I have this computer and I have a customer that may benefit from it. > It has 25 phones and want to install an E1 for pstn access. > > here are xorcom tests that were provided by Mr. Cohen form xorcom. > > Here's one VIA EPIA 512MB system: > http://www.xorcom.com/ts-1/features.html > > Here's how it performs with SIP: > http://www.xorcom.com/ts-1/test-results.html > > So it seems that I can run an E1 PRI and almost 30 ulaw SIP phones > (canreinvite=yes/no??) > > I didn't knew asterisk was so scalable. > > comments? > > _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED] REMEMBER: AstLinux mailing lists are moving soon: http://sourceforge.net/mail/?group_id=170462 Please move any discussions ASAP!
