At 13:09 09/01/2008 +0100, Jonathan GF wrote:
>A1) I'm not sure if you can use PDO. Devels should answer this.
I mentionned PDO because it's the most used way to access SQLite from PHP,
but I don't mind if there's another way more suitable to AstLinux.
>Anyway what i should do is use GParted to create 3 unformated slices and
>then follow the docs in the web.
I'm a bit lost, because fdisk only reports the 60MB used by AstLinux, but I
don't know how to go from there to recover the 900+MB on the 1GB CF card:
# fdisk -l
Disk /dev/hda: 1024 MB, 1024966656 bytes
16 heads, 63 sectors/track, 1986 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 130 65488+ 83 Linux
# df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/hda1 63413 52768 10645 83% /
none 200 0 200 0% /dev
none 5000 132 4868 3% /var
none 10000 480 9520 5% /tmp
Should I use some other application?
Thanks.
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
