Hello I have two issues:
1. With SHELL set to the default "/bin/sh" and TERM set to "xterm", and with two SSH clients supposed to support xterm (SecureCRT and Putty), I'm having a problem using cursor keys (arrows) with SQLite: BACKSPACE works OK after adding "stty erase ^H" in sh., but cursor keys are NOK (up arrow = ^[[A, CTRL-C ignored, etc.) Additionally, in vi, hitting the HOME key sends the cursor to the far-right end of the screen instead of right after the last character on the line as I expect it to. I don't know if it's hard-coded in vi or can be changed. Also, "less" only supports going downward, by hitting the ENTER key, but won't go back up using either the up arrow or the BACKSPACE key. BTW, I didn't find where TERM is set. There's nothing in /etc/rc.conf, /etc/profile, or /etc/rc. /etc/inittab says this, and it's commented out: # ttyS0::respawn:/sbin/getty -L 19200 /dev/ttyS0 vt100 => Does someone know if something can be done about the cursor keys? It's annoying because the up arrow is used to recall previous commands, and CTRL-C is used to cancel a command. 2. I'm located at UCT+1, so even with NTPd active, the time is one-hour off. I see TZ_TIMEZONE mentioned in /etc/rc, and TIMEZONE and TZ_TIMEZONE mentioned in /etc/rc.conf. What is the right way to change the TZ? Thank you. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
