Hi group,

i've booted after 15 days by pbx and after that i can't see the ZAP
channel.... something weird. I'm writting because i think nothing have
changed related to configuration but the boot show an eror on /dev, so i try
luck with you:

I have a TDM400P with 1 FXO. The boot shows an error "*open error on
/dev/zap/1: No such device or address".* The snippet:

going to runlevel default...
PPP generic driver version 2.4.2
HDLC support module revision 1.20
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.4.7.1
Zaptel Echo Canceller: MG2
Freshmaker version: 73
Freshmaker passed register test
Module 0: Installed -- AUTO FXO (FCC mode)
Module 1: Not installed
Module 2: Not installed
Module 3: Not installed
Found a Wildcard TDM: Wildcard TDM400P REV I (1 modules)
Registered tone zone 6 (Spain)
Setting ethernet parameters for eth0...
Configuring sensors...
pc87360: Device 0x09 not activated
Starting syslogd...
Starting crond...
Starting ntpd...
Starting sshd...
Starting inetd...
ln: /var/log/asterisk/cdr-csv/cdr-csv: File exisunionfs: remount ignoring
option "dirs"
ts
Running initial configuration founionfs: remount ignoring option "dirs"
r pikainlineMM...
/etc/runlevels/default/S60asterisk: line 100: pikacf: command not found
Starting Asterisk...
*open error on /dev/zap/1: No such device or address*
Starting mini_httpd...


Any ideas?

Thanks in advance.
Regards,

Jonathan GF
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to [EMAIL 
PROTECTED]

Reply via email to