Jonathan GF wrote:
> Hi group,
>
> i've booted after 15 days by pbx and after that i can't see the ZAP 
> channel.... something weird. I'm writting because i think nothing have 
> changed related to configuration but the boot show an eror on /dev, so 
> i try luck with you:
>
> I have a TDM400P with 1 FXO. The boot shows an error "*open error on 
> /dev/zap/1: No such device or address".* The snippet:
>
> going to runlevel default...
> PPP generic driver version 2.4.2
> HDLC support module revision 1.20
> Zapata Telephony Interface Registered on major 196
> Zaptel Version: 1.4.7.1 <http://1.4.7.1>
> Zaptel Echo Canceller: MG2
> Freshmaker version: 73
> Freshmaker passed register test
> Module 0: Installed -- AUTO FXO (FCC mode)
> Module 1: Not installed
> Module 2: Not installed
> Module 3: Not installed
> Found a Wildcard TDM: Wildcard TDM400P REV I (1 modules)
> Registered tone zone 6 (Spain)
> Setting ethernet parameters for eth0...
> Configuring sensors...
> pc87360: Device 0x09 not activated
> Starting syslogd...
> Starting crond...
> Starting ntpd...
> Starting sshd...
> Starting inetd...
> ln: /var/log/asterisk/cdr-csv/cdr-csv: File exisunionfs: remount 
> ignoring option "dirs"
> ts
> Running initial configuration founionfs: remount ignoring option "dirs"
> r pikainlineMM...
> /etc/runlevels/default/S60asterisk: line 100: pikacf: command not found
> Starting Asterisk...
> *open error on /dev/zap/1: No such device or address*
> Starting mini_httpd...
>
>
> Any ideas?
Yes, use a more recent version.  Most of those errors were fixed in 
recent versions. 

Darrick


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to [EMAIL 
PROTECTED]

Reply via email to