Jaime Blaney wrote: > Hi everyone, > > I´m running a i586 image on an Alix board and it´s working well with a > usb keydisk but I want to use the same CF that contains Astlinux tu put > my keydisk, so I created a hda3 partition in it and using genkd copied > the config files succesfully. The problem is that when rebooting the > init scripts don´t see the keydisk.
Jaime Specifically which image are you using? A 0.4.X release or one of my testing images? In either case, you must specify the key disk either in the grub config (if a 0.4.x release) or in the KCMD line of the astlinux-XXX.run.conf file in a newer image. If you used a recent version of genkd, the file system should be labeled as ASTKD. If that's the case, you can set astkd=auto to auto detect the key disk partition. Darrick -- Darrick Hartman DJH Solutions, LLC http://www.djhsolutions.com http://www.djhsolutions.com/wiki ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
