Jamie - I have done exactly that on several HP Thin Clients using the
.4.8 image on a 256Meg Flash
Configure properly and all will work well
John Novack
Darrick Hartman (lists) wrote:
Jaime Blaney wrote:
Hi everyone,
I?m running a i586 image on an Alix board and it?s working well with a
usb keydisk but I want to use the same CF that contains Astlinux tu put
my keydisk, so I created a hda3 partition in it and using genkd copied
the config files succesfully. The problem is that when rebooting the
init scripts don?t see the keydisk.
Jaime
Specifically which image are you using? A 0.4.X release or one of my
testing images? In either case, you must specify the key disk either in
the grub config (if a 0.4.x release) or in the KCMD line of the
astlinux-XXX.run.conf file in a newer image.
If you used a recent version of genkd, the file system should be labeled
as ASTKD. If that's the case, you can set astkd=auto to auto detect the
key disk partition.
Darrick
--
Dog is my co-pilot
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
