Terry Markovich wrote: > I have found an error in the > /trunk/target/generic/target_skeleton/etc/init.d/network script > regarding PPPoE. > > The script writes to /tmp/etc/ppp/pppoe.conf > > CONFIG=\"/etc/ppp\" > CF_BASE=\"pppoe.conf\" > > The problem is that $CONFIG is used all over the pppoe-start and > pppoe-status scripts, so $CONFIG gets reassigned from it's default of > /etc/ppp/pppoe.conf, pppoe-status fails for a missing config and then > the pppoe-start times out, although PPPoE is actually running. No pid > files get created so it does not even shutdown pppd/pppoe when it fails. > > Removing both of these variables from the network script works for me, > pid files are created and it does not complain about a timeout. > > Terry Markovich >
Isn't /etc/ppp a symlink to /tmp/etc/ppp on your system? Or is there a separate issue to this? I remember looking at the PID issue before, and it struck me that it was caused by inconsistent naming in the filenames. I.e. what got created and what was checked for weren't the same. -Philip ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
