Hi I have resolved this issue now, and thought I would share it in case anyone hits this.
After the upgrade all the original files were restored to the keydisk except for the rc.conf and the zaptel.conf which I created by hand. When I configured the latter I setup the file as : fxsks=3 fxsks=4 loadzone=uk defaultzone=uk which ztcfg seemed quite happy about. However what I had forgotten was I have an FXS module in port 1 which I no longer use (I use just sip extensions). I added configuration for this module as follows : fxoks=1 fxsks=3 fxsks=4 loadzone=uk defaultzone=uk and PSTN is all up and running again. The bottom line is that it seems you need zaptel.conf entries for every module on the card regardless of whether or not you are using it. regards Mart Martin Rogers wrote: > Hi > > I have just upgraded a Wyse Winterm box which was running an old > Astlinux (Asterisk v1.2) to 0.6.1-via. > > The box is connected to two PSTN lines via a TDM400 card and has worked > fine. > > I backed up all the config from my key disk and did a physdiskwrite of > the new image onto the CF. I then scratched the keydisk and ran keygen. > Finally I copied over my old config. > > All went well except that I have no PSTN access. > > ztcfg and zttools report back favorably and I have two leds on the back > of the card. My original dialplan is in place and works fine for my > SIP-SIP calls, but if I try to call out on a PSTN number I get : > > "dial_exec_full: Unable to create channel of type 'Zap' (cause 66 - > Channel not implemented) " > > I would be grateful for any comments. > > Thanks > Mart > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to [EMAIL > PROTECTED] > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]