Dieter Raith wrote:
> I got the following error message. As I have read that most developers
> of astlinux use Ubuntu, I have setup
> a virtual system Ubuntu 8.10. Kernel is 2.6.27.-9-generic. The reason
> while I do not use the ready to use
> system is the fact, that I want to use a Fritz!Card for EuroISDN which
> is no longer supported. So if I want to
> use it, I am forced to build the system from the SVN sources. I googled
> about that error, but all the answers
> seemed to have nothing to do with the problem. This error in Setup
> happens in the defining part of the
> subroutines and the script never started to work. I worked hours to
> check where the problem could be without
> success and was very close to give up. I talked with my colleagues and
> one proposed to replace /bin/sh with /bin/bash. And it worked!!!!
Ubuntu (which I don't use) uses dash. Some scripts assume that /bin/sh
is a symbolic link to /bin/bash. This isn't the first time that dash
has caused a problem like this. Since I don't use Ubuntu, the other
developers should really comment on this. (I use Centos 5).
Also, you should join the astlinux-devel mailing list. Discussion about
development related issues should be on that mailing list.
Darrick
> As I am not (yet) deeply involved in the development of astlinux, I
> hope that someone will care for it and
> correct it in the sources if it is not a problem Ubuntu 8.10 which I use.
> Rgds
> Dieter
>
> Error message:
> ############
> make[1]: Betrete Verzeichnis '/raith/astlinux-0.6/build_i586/wanpipe-3.3.10'
>
> +--------- Wanpipe Build Info --------------+
>
> Compiling Wanpipe with ZAPTEL Support!
> Zaptel Dir: /raith/astlinux-0.6/build_i586/zaptel-1.4.12.1/kernel
>
> touch: kann "/etc/wanpipe/.zaphdlc" nicht berühren: No such file or
> directory
> Zaptel HW HDLC support detected
>
> Please recompile and reinstall ZAPTEL after installation
>
> +-------------------------------------------+
>
> Done
> ./Setup drivers
> --builddir=/raith/astlinux-0.6/build_i586/wanpipe-3.3.10/ast_build_dir
> --with-linux=/raith/astlinux-0.6/build_i586/linux-2.6.20.21-astlinux
> --zaptel-path=/raith/astlinux-0.6/build_i586/zaptel-1.4.12.1/kernel
> --usr-cc=/raith/astlinux-0.6/build_i586/staging_dir/bin/i586-linux-uclibc-gcc
> --protocol=DEF-TDM --no-zaptel-compile --noautostart --arch=i386 --silent
> ./Setup: 1357: Syntax error: "(" unexpected
> make[1]: *** [all_bin_kmod] Fehler 2
> make[1]: Verlasse Verzeichnis
> '/raith/astlinux-0.6/build_i586/wanpipe-3.3.10'
> make: *** [/raith/astlinux-0.6/build_i586/wanpipe-3.3.10/.built] Fehler 2
>
------------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It is the best place to buy or sell services for
just about anything Open Source.
http://p.sf.net/sfu/Xq1LFB
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
