Hello all I'm trying to get an OpenVox B200M miniPCI 2-port BRI card to work with Astlinux 0.6.6 in a net5501. It is an HFC-4S chip, but with only two interfaces. I've tried to get it working, but it seems to dial out only on one of the two ports, and I can't get it to receive calls at all. I have a few questions, basically trying to determine whether I should base my configuration on the fact that the chip is the HFC-4S, or on the fact that it only has two ports:
1. Which of the HFC hardware detect lines from rc.conf should I add to user.conf? I assume I should use ISDN_MODPROBE="hfcmulti type=0x04 protocol=0x2,0x2 layermask=0xf,0xf" Or should I change the type parameter to 0x02, because the card only has two ports? 2. In misdn-init.conf, should the line which identifies the card be card=1,0x4 or card=1,0x2 3. Does Astlinux's version of mISDN support the function misdn_check_l2l1(), which I believe is required to have outgoing mISDN groups work properly? Thanks for any help. Tom ------------------------------------------------------------------------------ Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
