> I am using Astlinux 0.6.7 on a Soekris net5501.
> I am trying to get a Junghanns singleE1 miniPCI card (HFC-E1 chipset) to work.
lspci -v looks like it provides the explanation:
00:11.0 ISDN controller: Cologne Chip Designs GmbH ISDN network
Controller [HFC-E1] (rev 01)
Subsystem: Cologne Chip Designs GmbH: Unknown device b55a
Flags: medium devsel, IRQ 15
I/O ports at e500 [size=8]
Memory at a0005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Looks as though b55a (is that what is known as the subvendor id?) is
not in hfc_multi.c, so the card is not recognized. I've created a
.patch to add it, with the same parameters as the Junghanns E1 card
listed in hfc_multi.c - not confirmed to work yet, but I'd like to
test it.
Is it possible, using the Astlinux dev environment, to build only
mISDN rather than building all of Astlinux, and then simply copy over
the mISDN module? I'm also trying to work out whether I can use the
ADE on Ubuntu x64 (I know the web page says x64 build systems are not
supported). Not sure where to go next - should I be joining
astlinux-devel? This is my first foray into building (of anything, not
just Astlinux), so I might not be very welcome...
Thanks
Tom
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
