I am trying to use ttyS1 for CDR output from my astlinux box.
I use the 'h' extension in asterisk to run a shell command to tail the
cdr-custom/Master.csv file one line after the user hangs up..
This works great.. but I cannot figure in astlinux where to set the
parameters for ttyS1 at startup..
I have tried stty command: stty 1200 -F /dev/ttyS1
And then stty -a -F /dev/ttyS1
The display will show it was set at 1200 baud but output to the port is
still at the default of 9600 baud.
I want to make the baud rate change at boot and so it sticks across
reboots..
-Christopher
------------------------------------------------------------------------------
SOLARIS 10 is the OS for Data Centers - provides features such as DTrace,
Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW
http://p.sf.net/sfu/solaris-dev2dev
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
