>Hello all > >A major issue with 0.7.1 seems to have transpired. I upgraded six or so >boxes last week, two of which use DAHDI. Asterisk seems to have failed to >run. When I try to start it from the command line, I get: > >[Apr 7 09:40:18] ERROR[2705]: asterisk.c:3099 main: Asterisk has detected a >problem with your DAHDI configuration and will shutdown for your protection. >You have options: > 1. You only have to compile DAHDI support into Asterisk if you need >it. One option is to recompile without DAHDI support. > 2. You only have to load DAHDI drivers if you want to take advantage >of DAHDI services. One option is to unload DAHDI modules if you don't need >them. > 3. If you need Zaptel services, you must correctly configure DAHDI. > >DAHDI was working on these boxes in 0.7.0, and Zaptel on them in 0.6. > >Can anyone help? > >Tom
I don't know if it's related, but I tested the vzaphfc driver (community driver for single port HFC ISDN cards) with DAHDI 2.2.1 in trunk with Asterisk 1.6 .2.6 recently and got similar messages: ---------------------------- Apr 7 15:17:31 net4801 local0.err asterisk[1497]: ERROR[1491]: res_timing_dahdi.c:172 in dahdi_test_timer: Asterisk has detected a problem with your DAHDI configuration and will shutdown for your protection. You have options: 1. You only have to compile DAHDI suppor Apr 7 15:17:31 net4801 local0.warn asterisk[1497]: WARNING[1491]: chan_dahdi.c:17050 in process_dahdi: Ignoring any changes to 'userbase' (on reload) at line 23. Apr 7 15:17:31 net4801 local0.warn asterisk[1497]: WARNING[1491]: chan_dahdi.c:17050 in process_dahdi: Ignoring any changes to 'vmsecret' (on reload) at line 31. Apr 7 15:17:31 net4801 local0.warn asterisk[1497]: WARNING[1491]: chan_dahdi.c:17050 in process_dahdi: Ignoring any changes to 'hassip' (on reload) at line 35. Apr 7 15:17:31 net4801 local0.warn asterisk[1497]: WARNING[1491]: chan_dahdi.c:17050 in process_dahdi: Ignoring any changes to 'hasiax' (on reload) at line 39. Apr 7 15:17:31 net4801 local0.warn asterisk[1497]: WARNING[1491]: chan_dahdi.c:17050 in process_dahdi: Ignoring any changes to 'hasmanager' (on reload) at line 47. Apr 7 15:17:31 net4801 local0.err asterisk[1497]: ERROR[1491]: codec_dahdi.c:620 in find_transcoders: Failed to open /dev/dahdi/transcode: No such file or directory Apr 7 15:17:32 net4801 user.info kernel: vzaphfc: card 0: chan B1 opened as ZTHFC1/0/1. Apr 7 15:17:32 net4801 user.info kernel: vzaphfc: card 0: chan B2 opened as ZTHFC1/0/2. Apr 7 15:17:32 net4801 user.info kernel: vzaphfc: card 0: chan D opened as ZTHFC1/0/3. Apr 7 15:17:32 net4801 user.warn kernel: vzaphfc: card 0: chan D: TX FIFO has become empty ------------------------------- But in my case it could also be a configuration issue, I never used DAHDI or that driver before with Astlinux. What I found out was, that "dahdi_transcode" is also needed and "dahdi_dummy" must be loaded after all the drivers. Michael http://www.mksolutions.info ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.