Tom, I'd call Digium or your reseller. Sounds like a bad card.
Darrick On 05/17/2010 07:38 AM, Tom Chadwin wrote: > 0.7.2 resolves this issue. Who knows whether it was an Asterisk or Dahdi > problem. Thanks everyone. > > I have two VPMADT032s. One seems to be working. The other has the following > in dmesg: > > VPMADT032 Failed! Unable to ping the DSP (2)! > > Can this indicate anything other than a hardware problem? > > Thanks > > Tom > > >> -----Original Message----- >> From: Lonnie Abelbeck [mailto:li...@lonnie.abelbeck.com] >> Sent: 09 April 2010 14:27 >> To: AstLinux Users Mailing List >> Cc: Tom Chadwin >> Subject: Re: [Astlinux-users] 0.7.1 DAHDI Asterisk crash >> >> >> On Apr 9, 2010, at 8:14 AM, Tom Chadwin wrote: >> >>> Obviously, the newer versions do seem to have been DAHDIed, >> but then >>> DAHDI started no problem under 0.7.0 (though I don't >> definitely know >>> that the ec was functioning). I wonder if dropping the >> newer version >>> into /lib/firmware would do the trick? If so, how much of >> the folder >>> structure should be maintained? Should it look something like this? >>> >>> /lib/firmware/drivers/dahdi/vpmadt032_loader/vpmadt032_loader.h >>> >> /lib/firmware/drivers/dahdi/vpmadt032_loader/vpmadt032_x86_32.o_shippe >>> d >>> >> /lib/firmware/drivers/dahdi/vpmadt032_loader/vpmadt032_x86_64.o_shippe >>> d >> >> No, I wouldn't do that. >> >> Lonnie >> >>> >>> Presumably the last file is irrelevant in a net5501. >>> >>>> Tom, what does: >>>> >>>> $ lsmod | grep dahdi_vpmadt032_loader >>>> >>>> show? >>> >>> haltwhistlepbx ~ # lsmod | grep dahdi_vpmadt032_loader >>> dahdi_vpmadt032_loader 172384 0 >>> dahdi_voicebus 34656 2 dahdi_vpmadt032_loader,wctdm24xxp >>> >>> So, it seems to be loaded, though from where, I am not >> sure. I shall >>> try removing the .bin firmware file, rebooting, and trying >> that lsmod again. >>> >>> Thanks for all the help everyone - sorry to take up so much time >>> >>> Tom >>> >>> >>>> -----Original Message----- >>>> From: Lonnie Abelbeck [mailto:li...@lonnie.abelbeck.com] >>>> Sent: 09 April 2010 13:16 >>>> To: AstLinux Users Mailing List >>>> Cc: Tom Chadwin >>>> Subject: Re: [Astlinux-users] 0.7.1 DAHDI Asterisk crash >>>> >>>> >>>> On Apr 9, 2010, at 3:33 AM, Tom Chadwin wrote: >>>>> So, I think my last conclusion was in error. The box >> which has the >>>>> firware in /lib/firmware is the one which I manually added >>>> the firware to in 0.6.x. >>>>> Is it possible for it to have persisted across the 0.7 upgrade? >>>> >>>> Tom, >>>> >>>> If you manually added the zaptel-fw-vpmadt032.bin to /lib/firmware >>>> then it would persist across versions since it resides on >> the unionfs >>>> overlay of the base image /lib/firmware directory. >>>> >>>> In this directory... >>>> >>>> http://downloads.digium.com/pub/telephony/firmware/releases/ >>>> >>>> There is a much newer version: >>>> >>>> http://downloads.digium.com/pub/telephony/firmware/releases/da >>>> hdi-fwload-vpmadt032-1.22.0.tar.gz >>>> >>>> It looks quite different from the .bin file, though... >>>> >>>> Tom, what does: >>>> >>>> $ lsmod | grep dahdi_vpmadt032_loader >>>> >>>> show? >>>> >>>> If nothing, perhaps "dahdi_vpmadt032_loader" should be added to >>>> DAHDIMODS ? >>>> >>>> Someone with more (any :-) ) experience using this card >> will have to >>>> chime in, I'm just guessing. I don't want Tom to do >> anything to keep >>>> his remote box from booting. >>>> >>>> Lonnie -- Darrick Hartman DJH Solutions, LLC http://www.djhsolutions.com ------------------------------------------------------------------------------ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
