Hello Darrick
Hello Lonnie,
My main aim is to define the IP range; the router and the dns server for DHCP on
each network separately.
My problem to some extent is getting my head around what can be done in the GUI
and what has to be done by hand.
And then making sure I know where everything is because when I get it working I
want to transfer all the config files to another AstLinux machine.
i.e. new install - standard config, overwritten with these config files, re-boot
hope the two machines are exactly the same.
Here's what I've found:
Firstly re "On 10/22/2010 06:06 PM, Lonnie Abelbeck wrote:"(see below).
I have the following interfaces:
*Internal Interfaces:*
1st LAN Interface: -- -- IP: NetMask:
2nd LAN Interface: -- -- IP: NetMask:
3rd LAN Interface: -- -- IP: NetMask:
If I edit the "/mnt/kd/dnsmasq.static" file using the GUI and insert the
dhcp-options that Lonnie includes in her mail.
Then when I do a Restart DNS & DHCP
I get "Action Failed."
If I comment out Lonnies dhcp-options again and Restart DNS & DHCP then it
restarts.
Now,
If I have DNS & DHCP running on eth2 i.e. I change the settings on the Network
screen, save the changes and Restart DNS & DHCP and _then_ make the changes that
Lonnie suggested the DHCP restarts OK.
HOWEVER - I now have two dhcp ranges.
i.e. from the syslog on the status screen:
Nov 8 21:13:59 iPBX daemon.info dnsmasq[26240]: started, version 2.55
cachesize 2048
Nov 8 21:13:59 iPBX daemon.info dnsmasq[26240]: compile time options: IPv6
GNU-getopt no-DBus no-I18N DHCP TFTP
Nov 8 21:13:59 iPBX daemon.info dnsmasq-dhcp[26240]: DHCP, IP range
192.168.207.125 -- 192.168.207.130, lease time 1h
Nov 8 21:13:59 iPBX daemon.info dnsmasq-dhcp[26240]: DHCP, IP range
192.168.207.100 -- 192.168.207.252, lease time 1d
Nov 8 21:13:59 iPBX daemon.info dnsmasq-tftp[26240]: TFTP root is /tftpboot
Nov 8 21:13:59 iPBX daemon.info dnsmasq[26240]: using local addresses only for
domain infoservers.net
Nov 8 21:13:59 iPBX daemon.info dnsmasq[26240]: reading /etc/resolv-extern.conf
Nov 8 21:13:59 iPBX daemon.info dnsmasq[26240]: using nameserver 192.168.1.1#53
Nov 8 21:13:59 iPBX daemon.info dnsmasq[26240]: using local addresses only for
domain infoservers.net
Nov 8 21:13:59 iPBX daemon.info dnsmasq[26240]: read /etc/hosts - 3 addresses
Nov 8 21:13:59 iPBX daemon.info dnsmasq-dhcp[26240]: read /etc/ethers - 0
addresses
(I set the lease time to '1h' and the range to 125-130 - not like in Lonnie's
example)
This is not what I want.
The question is how to I get it working?
All the Best,
-Graham-
Darrick Hartman wrote on 24/10/2010 08:08:
> Graham,
>
> Each network interface does have separate options. You can currently
> enable dhcp or disable dhcp on a specific network interface (from the
> web interface) and only offer dns on that network. You're then able to
> enable dhcp on whatever device you want on that network.
>
> You can over-ride non-standard settings by creating a
> /mnt/kd/dnsmasq.conf file. I don't see extensive ability to add every
> option under the sun to the web interface as the current feature set
> meets the needs for a vast majority of users.
>
> I guess I'm a little confused about what does not work with the current
> options. Perhaps you could explain it a bit more so we understand
> exactly what you need.
>
> Darrick
>
> On 10/23/2010 04:08 PM, Graham S. Jarvis wrote:
>> Thank you Lonnie, Darrick,
>>
>> After burning a bit of midnight oil I went back to running the dhcp server on
>> the other router. This is what the router was doing before I put the 4801
>> in to
>> bridge the networks. Manually modifying config files makes me unsure if the
>> changes will be backed-up and I didn't want to spend more time trying to
>> restore
>> a backup onto another 4801 to see if they were.
>>
>> Perhaps this would be a useful enhancement in a future Astlinux release -
>> separate dhcp servers on each network interface and a better GUI for
>> selecting
>> the various dhcp-options for each interface.
>>
>> However, many thanks for your help!
>>
>> -Graham-
>>
>>
>>
>> Darrick Hartman wrote on 23/10/2010 01:19:
>>> Graham,
>>>
>>> If you have another router on a network that's providing dhcp, just
>>> disable dhcp on the specific ethernet adapter in AstLinux and allow the
>>> other device to handle dhcp. Nothing else should be required.
>>>
>>> I do this all the time with installations that have Windows Small
>>> Business server. The SBS must be dhcp for the subnet that it's on.
>>>
>>> Darrick
>>>
>>> On 10/22/2010 06:06 PM, Lonnie Abelbeck wrote:
>>>> Graham,
>>>>
>>>> It is possible, but not easy. My instinct is to disable DHCP on eth2 and
>>>> use the DHCP server on the gateway, but I'm sure you already thought of
>>>> that.
>>>>
>>>> 1) Using the web interface, Network tab, disable DHCP on the Internal
>>>> Interface using eth2 in question.
>>>>
>>>> 2) Again in the Network tab, (at the very bottom) click { Edit DNSMasq
>>>> Static }, then add the following lines:
>>>>
>>>> dhcp-range=lan2,192.168.222.100,192.168.222.252,24h
>>>> dhcp-option=lan2,option:router,192.168.222.1
>>>> dhcp-option=lan2,option:dns-server,192.168.222.1
>>>> dhcp-option=lan2,option:tftp-server,"192.168.222.1"
>>>> dhcp-option=lan2,150,192.168.222.1
>>>> dhcp-option=lan2,option:ntp-server,192.168.222.1
>>>>
>>>> replacing 192.168.222.1 with your gateway and use the proper dhcp-range.
>>>>
>>>> 3) Again in the Network tab, (top of page) select [ Restart DNS& DHCP ]
>>>> _x_ Confirm and click { Reboot/Restart }
>>>>
>>>> You should be in business, but remember that if you every change the eth2
>>>> Interface settings in the Network tab you must also change the manual DHCP
>>>> settings.
>>>>
>>>> Lonnie
>>>>
>>>>
>>>> On Oct 22, 2010, at 4:51 PM, Graham S. Jarvis wrote:
>>>>
>>>>> Hello all,
>>>>>
>>>>> I'm running 0.7.3 as a test installation on a Net4801 (ie three Ethernet
>>>>> ports).
>>>>> The 4801 is a gateway (using a DSL modem on eth0) for one network (eth1)
>>>>> but not
>>>>> for the other (eth2). All hosts on the network connected to eth2 use a
>>>>> different router on that network as the gateway.
>>>>>
>>>>> Is is possible to configure dhcp on eth2 so that it doesn't use itself as
>>>>> the
>>>>> gateway but uses a gateway somewhere else on that network?
>>>>> I don't find anything in the GUI and I didn't find my way around the
>>>>> various
>>>>> config files yet. There should be place where I can set (amongst other
>>>>> things)
>>>>> "dhcp-option=eth2,3,192.168.x.x" to point to the router/gateway.
>>>>>
>>>>> I don't (yet?) want dhcp on eth1 but if I did it should use itself as the
>>>>> gateway.
>>>>>
>>>>> Thanks in advance!
>>>>>
>>>>> -Graham-
>>>>>
>>>> ------------------------------------------------------------------------------
>>>> Nokia and AT&T present the 2010 Calling All Innovators-North America
>>>> contest
>>>> Create new apps& games for the Nokia N8 for consumers in U.S. and Canada
>>>> $10 million total in prizes - $4M cash, 500 devices, nearly $6M in
>>>> marketing
>>>> Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store
>>>> http://p.sf.net/sfu/nokia-dev2dev
>>>> _______________________________________________
>>>> Astlinux-users mailing list
>>>> Astlinux-users@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>>>>
>>>> Donations to support AstLinux are graciously accepted via PayPal to
>>>> pay...@krisk.org.
>>>
>> ------------------------------------------------------------------------------
>> Nokia and AT&T present the 2010 Calling All Innovators-North America contest
>> Create new apps& games for the Nokia N8 for consumers in U.S. and Canada
>> $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing
>> Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store
>> http://p.sf.net/sfu/nokia-dev2dev
>> _______________________________________________
>> Astlinux-users mailing list
>> Astlinux-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>>
>> Donations to support AstLinux are graciously accepted via PayPal to
>> pay...@krisk.org.
> ------------------------------------------------------------------------------
> Nokia and AT&T present the 2010 Calling All Innovators-North America contest
> Create new apps & games for the Nokia N8 for consumers in U.S. and Canada
> $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing
> Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store
> http://p.sf.net/sfu/nokia-dev2dev
> _______________________________________________
> Astlinux-users mailing list
> Astlinux-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to
> pay...@krisk.org.
>
------------------------------------------------------------------------------
The Next 800 Companies to Lead America's Growth: New Video Whitepaper
David G. Thomson, author of the best-selling book "Blueprint to a
Billion" shares his insights and actions to help propel your
business during the next growth cycle. Listen Now!
http://p.sf.net/sfu/SAP-dev2dev
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.