Hi Dan
 
Try looking at /etc/rc.modules. No idea what the default is, but e1000 is
commented out in my net5501 installs.

Hope this helps

Tom

________________________________

        From: Dan Ryson [mailto:[email protected]] 
        Sent: 11 January 2011 14:29
        To: [email protected]
        Subject: [Astlinux-users] Ethernet Driver Not Loading?
        
        
        I wonder if I can trouble our friendly community, yet again, for
advice...  
        
        For some reason, my on board NIC, an an Intel 82566DM-2, isn't being
recognized.*  According to lspci -k, this network interface is supported by
module e1000e.  However, it doesn't show a "Kernel driver in use:"
        
        

                00:19.0 Ethernet controller: Intel Corporation 82566DM-2
Gigabit Network Connection (rev 02)
                        Subsystem: Hewlett-Packard Company Device 2818
                        Kernel modules: e1000e
                

        Is user intervention required to get that module to load?  I have a
faint memory suggesting that was once necessary - but that was many dozens
of revisions ago.  
        
        * - Until the release of AstLinux 0.75, with it's expanded SATA
support, I've not been able to boot AstLinux from this motherboard at all.
Therefore, just getting AstLinux to run on this goofy hardware is viewed as
a huge success.
        
        Background:
        
        This is a squeaky-clean install with default everything. 
         
        Of course, to make use of the firewall, we'll need two Ethernet
ports.  With only one PCI slot in the machine, I'm compelled to make the
on-board NIC work.  However, there are also two unpopulated PCIe-x1 card
slots and I'm not adverse to buying another Ethernet card or two - presuming
that PCIe interface and hardware could be made to work.  
        
        When I first fired up the machine with 0.75, no Eth0 was found.
I've since added an Intel Pro 100 (in the formerly vacant PCI slot) that
works just fine as Eth0.  Here's what lspci -k reports about it:
        
        

                07:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1
Ethernet Pro 100 (rev 08)
                        Subsystem: Intel Corporation EtherExpress PRO/100+
Management Adapter
                        Kernel driver in use: eepro100
                        Kernel modules: eepro100, e100  
                

        As always, I'm grateful that you've considered my question.  Any
help would be greatly appreciated.  
        
        Dan 
        



------------------------------------------------------------------------------
Gaining the trust of online customers is vital for the success of any company
that requires sensitive data to be transmitted over the Web.   Learn how to 
best implement a security strategy that keeps consumers' information secure 
and instills the confidence they need to proceed with transactions.
http://p.sf.net/sfu/oracle-sfdevnl 
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to 
[email protected].

Reply via email to