Oh im glad to know astlinux is on libata.. Is 1.0.2 on eglibc or still on
uclibc?  Or is it switchable in the build environment?
One of the tricks to making asterisk work in large environments is to
manually load your modules and load only the ones you need..  I only load
34 modules for most systems...   I also keep running linux processes to a
minimum and don¹t allow asterisk to compress for internal calls...  In
large installations ive been known to set up 'trunking gateways' that will
handle compression so the main phone system doesn¹t have to... I also do
as much directmedia=yes as I can so that asterisk is out of the calls..
In my installations use of inband call features isnt required so I don¹t
need asterisk to remain in the RTP stream..  So I make asterisk as much of
just a call-control as possible..  Many customers have traditional T1 or
PRI circuits coming in as their trunks..  I find it just as if not more
cost effective to toss say an adtran 904 gateway in front of the asterisk
rather than a T1 card in the PBX..  The adtran has advanced echo can..
Talks SIP to asterisk and then PRI / T1 to the telco..  With directmedia
enabled the phones once calls are established they talk RTP directly..
Call setup doesn¹t take a lot of resources so the high number of
simultaneous calls can be obtained easily...
-Christopher

On 2/26/12 7:19 PM, "Lonnie Abelbeck" <[email protected]> wrote:

>Hi Chris,
>
>Thanks for the RAM info.  I tested a VMware instance of AstLinux 1.0.x
>and it also had a 3GB limit when I cranked up the RAM.
>
>"768 line (asterisk) system with 80 simultaneous calls without even
>flinching" for an Atom D525.
>
>Wow!  Nice to know.
>
>Please do try the latest AstLinux 1.0.2 from:
>
>http://mirror.astlinux.org/downloads/img/
>
>on your Jetway boards, it should work now with our libata support.
>
>Lonnie
>
>
>
>On Feb 26, 2012, at 5:43 PM, Chris Abnett wrote:
>
>> 3 gig is the normal limit for any 32 bit OS.. Well  3.5 gigs..  But
>>unless
>> you go 64 bit you cannot tap  any more RAM than that... Most all of the
>> atom boards will run a 64 bit kernel..  I run  my D525 boards regularly
>> with 64 bit OS...  With asterisk..  I have tested 768 line system with
>>80
>> simultaneous calls without even flinching....
>> 
>> My Jetway boards had issue with older astlinux because they need the
>> libata drivers running to access its disks..  I havent tried them with
>>the
>> latest astlinux yet..
>> -Christopher
>> 
>> On 2/26/12 5:33 PM, "Lonnie Abelbeck" <[email protected]> wrote:
>> 
>>> Hi Ionel,
>>> 
>>> Thanks for sharing your hardware config.  Good to hear an Intel Atom
>>> D2700 works fine.  Lots of horsepower, and a good price.
>>> 
>>> I have heard there are video issues with the D2700 (Cedarview) and
>>>Linux
>>> drivers:
>>> 
>>> http://www.logicsupply.com/faq?faq1=26&faq2=176
>>> 
>>> It seems this issue only applies for higher-end video applications, and
>>> not for AstLinux applications.  Good to know.
>>> 
>>> As for your 4GB memory, the AstLinux 1.0.x kernel configs are:
>>> --
>>> CONFIG_HIGHMEM4G=y
>>> # CONFIG_HIGHMEM64G is not set
>>> CONFIG_HIGHMEM=y
>>> --
>>> Possibly your board needs 2x2GB to access 4GB ?  Or is this normal to
>>> show 3GB for 4GB with Linux and the above kernel configs?  anyone ?  I
>>> don't know, but 3GB is way more than you will need.
>>> 
>>> Thanks again for sharing...
>>> 
>>> Lonnie
>>> 
>>> 
>>> 
>>> On Feb 26, 2012, at 3:43 PM, Ionel Chila wrote:
>>> 
>>>> Is there a RAM memory limitation in the Astlinux. I have a 4GB module
>>>> but I only show 3GB. Not that it matters since I have plenty of RAM
>>>>but
>>>> just curious. See attached pic for memory reading.
>>>> 
>>>> 
>>>> 
>>>> In a different note I've managed to put a really nice small footprint
>>>> (just one moving part) Mini-ITX system together and here are the specs
>>>> if anyone wants to replicate. Is working really well with Astlinux:
>>>> 
>>>> - Casetronic Travla C138 Mini-ITX case black
>>>>        ---> 
>>>> http://www.amazon.com/gp/product/B001KZ1H2E/ref=oh_o00_s00_i00_details
>>>> 
>>>> - INTEL RETAIL D2700MUD MINI-ITX ATOM INTEGRATED
>>>> 
>>>> 
>>>> ---> 
>>>> http://www.amazon.com/gp/product/B00797U2ZA/ref=oh_o02_s00_i00_details
>>>> 
>>>> - Kingston ValueRAM 4GB 1066MHz DDR3 Non-ECC Notebook Memory
>>>>        ---> 
>>>> http://www.amazon.com/gp/product/B001PYDKWU/ref=oh_o01_s00_i00_details
>>>> 
>>>> - Patriot Torqx 2 64GB SSD
>>>>        ---> 
>>>> 
>>>>http://www.amazon.com/Patriot-Memory-Torqx-2-5-Inch-PT264GS25SSDR/dp/B0
>>>>04
>>>> XVN1TO/ref=sr_1_1?
>>>> s=electronics&ie=UTF8&qid=1330291923&sr=1-1
>>>> 
>>>> - TDM410P V2 for Digium Asterisk PBX
>>>> 
>>>> 
>>>> ---> 
>>>> 
>>>>http://www.ebay.com/itm/TDM400P-TDM410P-V2-for-Digium-Asterisk-PBX-1FXO
>>>>-3
>>>> 
>>>>-FXS-Echo-Cancellation-Socket/170773174342?ssPageName=WDVW&rd=1&ih=007&
>>>>ca
>>>> tegory=11908&cmd=ViewItem#ht_2125wt_972
>
>
>--------------------------------------------------------------------------
>----
>Try before you buy = See our experts in action!
>The most comprehensive online learning library for Microsoft developers
>is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3,
>Metro Style Apps, more. Free future releases when you subscribe now!
>http://p.sf.net/sfu/learndevnow-dev2
>_______________________________________________
>Astlinux-users mailing list
>[email protected]
>https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
>Donations to support AstLinux are graciously accepted via PayPal to
>[email protected].



------------------------------------------------------------------------------
Try before you buy = See our experts in action!
The most comprehensive online learning library for Microsoft developers
is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3,
Metro Style Apps, more. Free future releases when you subscribe now!
http://p.sf.net/sfu/learndevnow-dev2
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to 
[email protected].

Reply via email to