Lonnie that is one bad ass board. Wish it was available when I've built my
system several months ago.
________________________________
From: Lonnie Abelbeck <[email protected]>
To: AstLinux Users Mailing List <[email protected]>
Sent: Saturday, November 3, 2012 12:28 PM
Subject: Re: [Astlinux-users] Install to SATA Flash Module
Tom, (looks like one of your emails didn't get directed to the list)
This PCIe (x1) riser *may* work (looks close by the photo) with the Jetway
JC-11x-B case:
PCI Express x1 Low-Profile Riser Card
http://www.logicsupply.com/products/pciex1_lpr
The folks at Logic Supply would know for sure.
Note the new Jetway NF9HQL-525 board is not widely available yet, the AstLinux
team tested an evaluation board offered by Jetway, but here is a source:
Jetway NF9HQL-525 Atom D525 Quad-LAN Thin Mini-ITX Motherboard
http://www.amazon.com/Jetway-NF9HQL-525-Quad-LAN-Mini-ITX-Motherboard/dp/B009TFIW84
(or directly from http://www.mitxpc.com )
The NF9HQL-525 price is good for 4x PCIe NIC's and a PCIe (x1) expansion, not
to mention CF and mSATA flash support not found onboard with some other boards.
Lonnie
PS: The first NF9HQL-525 did not ship with BIOS "A02" which supports serial
port BIOS configuration...
http://jetwaycomputer.com/NF9H.html -> BIOS -> BF9HAA02.zip
How to Flash a BIOS
http://doc.astlinux.org/userdoc:how_to_flash_bios
On Nov 3, 2012, at 9:24 AM, Ionel Chila wrote:
> From: Tom Mazzotta <[email protected]>
> To: Ionel Chila <[email protected]>
> Sent: Saturday, November 3, 2012 8:36 AM
> Subject: Re: [Astlinux-users] Install to SATA Flash Module
>
> It looks like the Startech gizmo is the easiest way to go. Thanks for
> the recommendation. BTW, has anyone found a source for a PCIe (x1)
> riser card that will work with the NF9HQL-525 and the Jetway JC-11x-B
> Case?
>
> On Fri, Nov 2, 2012 at 9:57 PM, Ionel Chila <[email protected]> wrote:
> > Yeap that should do it
> >
> > ________________________________
> > From: Tom Mazzotta <[email protected]>
> > To: AstLinux Users Mailing List <[email protected]>
> > Sent: Friday, November 2, 2012 8:14 PM
> > Subject: [Astlinux-users] Install to SATA Flash Module
> >
> > I'm putting together a test system using the spec on the wiki for the
> > Jetway NF99FL-525. In the past I have built systems for the Soekris
> > and Alix platforms by "dd'ing" the ISO image to a CF card attached to
> > my laptop via a USB to CF reader. What is the recommended procedure
> > (and equipment requirement) to burn the image on to a SATA flash
> > module?
> >
> > -tm
------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
