Hello Astlinux-users, I've installed the alix image on the new APU.1C with a mSATA 16GB flash disk. The system is starting, but for vararius reason it doesn't boot. I'm getting the following output:-
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >ata1.00: qc timeout (cmd 0xec) >ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >ata1.00: qc timeout (cmd 0xec) >ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >ata1: limiting SATA link speed to 1.5 Gbps >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: qc timeout (cmd 0xec) >ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >RAMDISK: gzip image found at block 0 >VFS: Mounted root (ext2 filesystem) on device 1:0. >Freeing unused kernel memory: 452k freed >Runnix version 'runnix-0.4-6112' starting... >Runnix: AstLinux medium not found. >Dropping to shell, type 'exit' to reboot Any hint on how to resolve the issue Regards, Armin. ------------------------------------------------------------------------------ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
