Am 31.03.2014 um 17:55 schrieb Armin Tüting <[email protected]>:
> Hello Astlinux-users, > > I've installed the alix image on the new APU.1C with a mSATA 16GB flash > disk. > The system is starting, but for vararius reason it doesn't boot. I'm > getting the following output:- > >> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata1.00: qc timeout (cmd 0xec) >> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata1.00: qc timeout (cmd 0xec) >> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >> ata1: limiting SATA link speed to 1.5 Gbps >> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> ata1.00: qc timeout (cmd 0xec) >> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> RAMDISK: gzip image found at block 0 >> VFS: Mounted root (ext2 filesystem) on device 1:0. >> Freeing unused kernel memory: 452k freed >> Runnix version 'runnix-0.4-6112' starting... >> Runnix: AstLinux medium not found. >> Dropping to shell, type 'exit' to reboot > > Any hint on how to resolve the issue > > Regards, > Armin. Please look at the astlinux-dev list, there are several threads regarding the APU: http://sourceforge.net/p/astlinux/mailman/astlinux-devel/ Michael http://www.mksolutions.info
smime.p7s
Description: S/MIME cryptographic signature
------------------------------------------------------------------------------
_______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
