Am 31.03.2014 um 18:32 schrieb Michael Keuter <[email protected]>:
> > Am 31.03.2014 um 17:55 schrieb Armin Tüting > <[email protected]>: > >> Hello Astlinux-users, >> >> I've installed the alix image on the new APU.1C with a mSATA 16GB flash >> disk. >> The system is starting, but for vararius reason it doesn't boot. I'm >> getting the following output:- >> >>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >>> ata1.00: qc timeout (cmd 0xec) >>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >>> ata1.00: qc timeout (cmd 0xec) >>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >>> ata1: limiting SATA link speed to 1.5 Gbps >>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >>> ata1.00: qc timeout (cmd 0xec) >>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >>> RAMDISK: gzip image found at block 0 >>> VFS: Mounted root (ext2 filesystem) on device 1:0. >>> Freeing unused kernel memory: 452k freed >>> Runnix version 'runnix-0.4-6112' starting... >>> Runnix: AstLinux medium not found. >>> Dropping to shell, type 'exit' to reboot >> >> Any hint on how to resolve the issue >> >> Regards, >> Armin. > > > Please look at the astlinux-dev list, there are several threads regarding the > APU: > http://sourceforge.net/p/astlinux/mailman/astlinux-devel/ > > Michael Also lots of threads here: http://pcengines.info Michael http://www.mksolutions.info
smime.p7s
Description: S/MIME cryptographic signature
------------------------------------------------------------------------------
_______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
