Hi Josh, I've personally never seen this, but such as that my advice is to boot into the runnix shell...
boot: shell Then try... ============== runnix# fdisk -l (just to see what is going on) runnix# e2fsck -y /dev/sda2 (ignore the missing mtab warning) If you still get the same error, get more agressive with e2fsck to try to resolve your issue. (when done, reboot with) runnix# exit ============== Lonnie On Jul 2, 2014, at 7:10 PM, Josh wrote: > Hello, > > At the recommendation of John and Lonnie, I decided to install Astlinux > 1.0-6575 to the internal flash storage on my Wyse R90L. I followed the > instructions on the wiki. After using dd to zero the drive and copy the > files, I can boot up and access the web interface. Everything seems fine > until I format the hard drive for persistent storage. I had the same results > doing this through the web interface and the CLI. "initial-setup format > combined /dev/sda" was successful, but when I rebooted, I see: > > Fsck detected errors on /dev/sda2 (0) > /bin/sh: can't access tty; job control turned off > > A picture of my screen is available here: > > http://i57.tinypic.com/2hrg0h1.jpg > > Does anyone have any ideas about what went wrong and what I can do to resolve > the issue? > > Thanks, > > Josh ------------------------------------------------------------------------------ Open source business process management suite built on Java and Eclipse Turn processes into business applications with Bonita BPM Community Edition Quickly connect people, data, and systems into organized workflows Winner of BOSSIE, CODIE, OW2 and Gartner awards http://p.sf.net/sfu/Bonitasoft _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
