Hello astlinux,

 

I managed to install and use astlinux on an Alix board with no problems.

 

Now I am trying to install on an old ASUS mother board, but I cannot get the
IP from DHCP, and the nic on the motherboard does not seem to be seen.

 

Attached are the messages file, the output of lspci and lsmod.

 

I have an X100P clone and an ISDN card. I should be connecting an analog
line to the X100P.

 

I did the initial initial-setup from the console.

 

Regards and thanks,

 

lus.

 

Oct 28 03:54:42 pbx syslog.info syslogd started: BusyBox v1.19.4
Oct 28 03:54:42 pbx user.notice kernel: klogd started: BusyBox v1.19.4 
(2014-10-01 11:23:41 CDT)
Oct 28 03:54:42 pbx user.info kernel: devices found.
Oct 28 03:54:42 pbx user.info kernel: PCI: Ignoring host bridge windows from 
ACPI; if necessary, use "pci=use_crs" and report a bug
Oct 28 03:54:42 pbx user.info kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 
[bus 00-ff])
Oct 28 03:54:42 pbx user.debug kernel: pci_root PNP0A03:00: host bridge window 
[io  0x0000-0x0cf7] (ignored)
Oct 28 03:54:42 pbx user.debug kernel: pci_root PNP0A03:00: host bridge window 
[io  0x0d00-0xffff] (ignored)
Oct 28 03:54:42 pbx user.debug kernel: pci_root PNP0A03:00: host bridge window 
[mem 0x000a0000-0x000bffff] (ignored)
Oct 28 03:54:42 pbx user.debug kernel: pci_root PNP0A03:00: host bridge window 
[mem 0x000d0000-0x000dffff] (ignored)
Oct 28 03:54:42 pbx user.debug kernel: pci_root PNP0A03:00: host bridge window 
[mem 0x3e000000-0xfebfffff] (ignored)
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:00.0: [1039:0651] type 0 
class 0x000600
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:00.0: reg 10: [mem 
0xe8000000-0xebffffff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:01.0: [1039:0001] type 1 
class 0x000604
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:02.0: [1039:0962] type 0 
class 0x000601
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:02.1: [1039:0016] type 0 
class 0x000c05
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:02.1: reg 20: [io  
0xe600-0xe61f]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:02.5: [1039:5513] type 0 
class 0x000101
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:02.5: reg 20: [io  
0xa400-0xa40f]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:02.7: [1039:7012] type 0 
class 0x000401
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:02.7: reg 10: [io  
0x9400-0x94ff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:02.7: reg 14: [io  
0x9000-0x907f]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:02.7: supports D1 D2
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:02.7: PME# supported from 
D3hot D3cold
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:02.7: PME# disabled
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:03.0: [1039:7001] type 0 
class 0x000c03
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:03.0: reg 10: [mem 
0xe7000000-0xe7000fff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:03.1: [1039:7001] type 0 
class 0x000c03
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:03.1: reg 10: [mem 
0xe6800000-0xe6800fff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:03.3: [1039:7002] type 0 
class 0x000c03
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:03.3: reg 10: [mem 
0xe6000000-0xe6000fff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:03.3: PME# supported from D0 
D3hot D3cold
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:03.3: PME# disabled
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:04.0: [1039:0900] type 0 
class 0x000200
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:04.0: reg 10: [io  
0x8800-0x88ff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:04.0: reg 14: [mem 
0xe5800000-0xe5800fff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:04.0: reg 30: [mem 
0xeffe0000-0xefffffff pref]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:04.0: supports D1 D2
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:04.0: PME# supported from D0 
D1 D2 D3hot D3cold
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:04.0: PME# disabled
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:0e.0: [10ec:8139] type 0 
class 0x000200
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:0e.0: reg 10: [io  
0x8400-0x84ff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:0e.0: reg 14: [mem 
0xe5000000-0xe50000ff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:0e.0: supports D1 D2
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:0e.0: PME# supported from D1 
D2 D3hot D3cold
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:0e.0: PME# disabled
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:0f.0: [1ae7:0520] type 0 
class 0x000280
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:0f.0: reg 10: [io  
0x8000-0x8007]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:0f.0: reg 14: [mem 
0xe4800000-0xe48000ff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:0f.0: supports D1 D2
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:0f.0: PME# supported from D0 
D1 D2 D3hot
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:0f.0: PME# disabled
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:10.0: [e159:0001] type 0 
class 0x000780
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:10.0: reg 10: [io  
0x7800-0x78ff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:10.0: reg 14: [mem 
0xe4000000-0xe4000fff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:10.0: supports D2
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:10.0: PME# supported from D0 
D2 D3hot D3cold
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:10.0: PME# disabled
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:01:00.0: [1039:6325] type 0 
class 0x000300
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:01:00.0: reg 10: [mem 
0xf0000000-0xf7ffffff pref]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:01:00.0: reg 14: [mem 
0xe7800000-0xe781ffff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:01:00.0: reg 18: [io  
0xd800-0xd87f]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:01:00.0: supports D1 D2
Oct 28 03:54:42 pbx user.info kernel: pci 0000:00:01.0: PCI bridge to [bus 
01-01]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:01.0:   bridge window [io  
0xd000-0xdfff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:01.0:   bridge window [mem 
0xe7800000-0xe7ffffff]
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:00:01.0:   bridge window [mem 
0xf0000000-0xfebfffff pref]
Oct 28 03:54:42 pbx user.debug kernel: pci_bus 0000:00: on NUMA node 0
Oct 28 03:54:42 pbx user.debug kernel: ACPI: PCI Interrupt Routing Table 
[\_SB_.PCI0._PRT]
Oct 28 03:54:42 pbx user.debug kernel: ACPI: PCI Interrupt Routing Table 
[\_SB_.PCI0.PCI1._PRT]
Oct 28 03:54:42 pbx user.info kernel:  pci0000:00: Unable to request _OSC 
control (_OSC support mask: 0x18)
Oct 28 03:54:42 pbx user.info kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 
5 6 7 10 11 12 14 15) *0, disabled.
Oct 28 03:54:42 pbx user.info kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 
5 6 7 10 11 12 14 15) *0, disabled.
Oct 28 03:54:42 pbx user.info kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 
5 6 7 10 11 12 14 15) *0, disabled.
Oct 28 03:54:42 pbx user.info kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 
5 6 7 10 11 12 14 15) *0, disabled.
Oct 28 03:54:42 pbx user.info kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 
5 6 7 10 11 12 14 15) *0, disabled.
Oct 28 03:54:42 pbx user.info kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 
5 6 7 10 11 12 14 15) *0, disabled.
Oct 28 03:54:42 pbx user.info kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 
5 6 7 10 11 12 14 15) *0, disabled.
Oct 28 03:54:42 pbx user.info kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 
5 6 7 10 11 12 14 15) *0, disabled.
Oct 28 03:54:42 pbx user.info kernel: vgaarb: device added: 
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Oct 28 03:54:42 pbx user.info kernel: vgaarb: loaded
Oct 28 03:54:42 pbx user.info kernel: vgaarb: bridge control possible 
0000:01:00.0
Oct 28 03:54:42 pbx user.notice kernel: SCSI subsystem initialized
Oct 28 03:54:42 pbx user.debug kernel: libata version 3.00 loaded.
Oct 28 03:54:42 pbx user.info kernel: usbcore: registered new interface driver 
usbfs
Oct 28 03:54:42 pbx user.info kernel: usbcore: registered new interface driver 
hub
Oct 28 03:54:42 pbx user.info kernel: usbcore: registered new device driver usb
Oct 28 03:54:42 pbx user.info kernel: PCI: Using ACPI for IRQ routing
Oct 28 03:54:42 pbx user.debug kernel: PCI: pci_cache_line_size set to 64 bytes
Oct 28 03:54:42 pbx user.debug kernel: reserve RAM buffer: 000000000009fc00 - 
000000000009ffff 
Oct 28 03:54:42 pbx user.debug kernel: reserve RAM buffer: 000000003dffc000 - 
000000003fffffff 
Oct 28 03:54:42 pbx user.info kernel: pnp: PnP ACPI init
Oct 28 03:54:42 pbx user.info kernel: ACPI: bus type pnp registered
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:00: [mem 0x00000000-0x0009ffff]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:00: [mem 0x000f0000-0x000fffff]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:00: [mem 0x00100000-0x3dffffff]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:00: [mem 0xfec00000-0xfec000ff]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:00: [mem 0xfee00000-0xfee00fff]
Oct 28 03:54:42 pbx user.info kernel: system 00:00: [mem 0x00000000-0x0009ffff] 
could not be reserved
Oct 28 03:54:42 pbx user.info kernel: system 00:00: [mem 0x000f0000-0x000fffff] 
could not be reserved
Oct 28 03:54:42 pbx user.info kernel: system 00:00: [mem 0x00100000-0x3dffffff] 
could not be reserved
Oct 28 03:54:42 pbx user.info kernel: system 00:00: [mem 0xfec00000-0xfec000ff] 
could not be reserved
Oct 28 03:54:42 pbx user.info kernel: system 00:00: [mem 0xfee00000-0xfee00fff] 
has been reserved
Oct 28 03:54:42 pbx user.debug kernel: system 00:00: Plug and Play ACPI device, 
IDs PNP0c01 (active)
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:01: [bus 00-ff]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:01: [io  0x0cf8-0x0cff]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:01: [io  0x0000-0x0cf7 window]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:01: [io  0x0d00-0xffff window]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:01: [mem 0x000a0000-0x000bffff 
window]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:01: [mem 0x000d0000-0x000dffff 
window]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:01: [mem 0x3e000000-0xfebfffff 
window]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:01: Plug and Play ACPI device, 
IDs PNP0a03 (active)
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:02: [io  0xe400-0xe47f]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:02: [io  0xe480-0xe4ff]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:02: [io  0xe600-0xe61f]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:02: [io  0x0480-0x048f]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:02: [mem 0xffee0000-0xffefffff]
Oct 28 03:54:42 pbx user.info kernel: system 00:02: [io  0xe400-0xe47f] has 
been reserved
Oct 28 03:54:42 pbx user.info kernel: system 00:02: [io  0xe480-0xe4ff] has 
been reserved
Oct 28 03:54:42 pbx user.info kernel: system 00:02: [io  0xe600-0xe61f] has 
been reserved
Oct 28 03:54:42 pbx user.info kernel: system 00:02: [io  0x0480-0x048f] has 
been reserved
Oct 28 03:54:42 pbx user.info kernel: system 00:02: [mem 0xffee0000-0xffefffff] 
has been reserved
Oct 28 03:54:42 pbx user.debug kernel: system 00:02: Plug and Play ACPI device, 
IDs PNP0c02 (active)
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:03: [mem 0xfffe0000-0xffffffff]
Oct 28 03:54:42 pbx user.info kernel: system 00:03: [mem 0xfffe0000-0xffffffff] 
could not be reserved
Oct 28 03:54:42 pbx user.debug kernel: system 00:03: Plug and Play ACPI device, 
IDs PNP0c02 (active)
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:04: [io  0x0010-0x001f]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:04: [io  0x0022-0x002d]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:04: [io  0x0030-0x003f]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:04: [io  0x0044-0x005f]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:04: [io  0x0062-0x0063]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:04: [io  0x0065-0x006f]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:04: [io  0x0074-0x007f]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:04: [io  0x0091-0x0093]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:04: [io  0x00a2-0x00bf]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:04: [io  0x00e0-0x00ef]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:04: [io  0x04d0-0x04d1]
Oct 28 03:54:42 pbx user.info kernel: system 00:04: [io  0x04d0-0x04d1] has 
been reserved
Oct 28 03:54:42 pbx user.debug kernel: system 00:04: Plug and Play ACPI device, 
IDs PNP0c02 (active)
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:05: [dma 4]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:05: [io  0x0000-0x000f]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:05: [io  0x0080-0x0090]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:05: [io  0x0094-0x009f]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:05: [io  0x00c0-0x00df]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:05: Plug and Play ACPI device, 
IDs PNP0200 (active)
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:06: [io  0x0070-0x0073]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:06: [irq 8]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:06: Plug and Play ACPI device, 
IDs PNP0b00 (active)
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:07: [io  0x0061]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:07: Plug and Play ACPI device, 
IDs PNP0800 (active)
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:08: [io  0x00f0-0x00ff]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:08: [irq 13]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:08: Plug and Play ACPI device, 
IDs PNP0c04 (active)
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:09: [io  0x0378-0x037f]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:09: [io  0x0778-0x077b]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:09: [irq 7]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:09: [dma 3]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:09: Plug and Play ACPI device, 
IDs PNP0401 (active)
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:0a: [io  0x03f8-0x03ff]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:0a: [irq 4]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:0a: Plug and Play ACPI device, 
IDs PNP0501 (active)
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:0b: [io  0x0060]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:0b: [io  0x0064]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:0b: [irq 1]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:0b: Plug and Play ACPI device, 
IDs PNP0303 (active)
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:0c: [io  0x0200-0x0207]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:0c: Plug and Play ACPI device, 
IDs PNPb02f (active)
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:0d: [io  0x002e-0x002f]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:0d: [io  0x03f0-0x03f1]
Oct 28 03:54:42 pbx user.debug kernel: pnp 00:0d: [io  0x0290-0x0297]
Oct 28 03:54:42 pbx user.info kernel: system 00:0d: [io  0x03f0-0x03f1] has 
been reserved
Oct 28 03:54:42 pbx user.info kernel: system 00:0d: [io  0x0290-0x0297] has 
been reserved
Oct 28 03:54:42 pbx user.debug kernel: system 00:0d: Plug and Play ACPI device, 
IDs PNP0c02 (active)
Oct 28 03:54:42 pbx user.info kernel: pnp: PnP ACPI: found 14 devices
Oct 28 03:54:42 pbx user.info kernel: ACPI: ACPI bus type pnp unregistered
Oct 28 03:54:42 pbx user.info kernel: Switching to clocksource acpi_pm
Oct 28 03:54:42 pbx user.debug kernel: PCI: max bus depth: 1 pci_try_num: 2
Oct 28 03:54:42 pbx user.info kernel: pci 0000:00:01.0: PCI bridge to [bus 
01-01]
Oct 28 03:54:42 pbx user.info kernel: pci 0000:00:01.0:   bridge window [io  
0xd000-0xdfff]
Oct 28 03:54:42 pbx user.info kernel: pci 0000:00:01.0:   bridge window [mem 
0xe7800000-0xe7ffffff]
Oct 28 03:54:42 pbx user.info kernel: pci 0000:00:01.0:   bridge window [mem 
0xf0000000-0xfebfffff pref]
Oct 28 03:54:42 pbx user.debug kernel: pci_bus 0000:00: resource 0 [io  
0x0000-0xffff]
Oct 28 03:54:42 pbx user.debug kernel: pci_bus 0000:00: resource 1 [mem 
0x00000000-0xffffffff]
Oct 28 03:54:42 pbx user.debug kernel: pci_bus 0000:01: resource 0 [io  
0xd000-0xdfff]
Oct 28 03:54:42 pbx user.debug kernel: pci_bus 0000:01: resource 1 [mem 
0xe7800000-0xe7ffffff]
Oct 28 03:54:42 pbx user.debug kernel: pci_bus 0000:01: resource 2 [mem 
0xf0000000-0xfebfffff pref]
Oct 28 03:54:42 pbx user.info kernel: NET: Registered protocol family 2
Oct 28 03:54:42 pbx user.info kernel: IP route cache hash table entries: 32768 
(order: 5, 131072 bytes)
Oct 28 03:54:42 pbx user.info kernel: TCP established hash table entries: 
131072 (order: 8, 1048576 bytes)
Oct 28 03:54:42 pbx user.info kernel: TCP bind hash table entries: 65536 
(order: 7, 524288 bytes)
Oct 28 03:54:42 pbx user.info kernel: TCP: Hash tables configured (established 
131072 bind 65536)
Oct 28 03:54:42 pbx user.info kernel: TCP reno registered
Oct 28 03:54:42 pbx user.info kernel: UDP hash table entries: 512 (order: 2, 
16384 bytes)
Oct 28 03:54:42 pbx user.info kernel: UDP-Lite hash table entries: 512 (order: 
2, 16384 bytes)
Oct 28 03:54:42 pbx user.info kernel: NET: Registered protocol family 1
Oct 28 03:54:42 pbx user.info kernel: pci 0000:00:03.0: PCI INT A -> GSI 20 
(level, low) -> IRQ 9
Oct 28 03:54:42 pbx user.info kernel: pci 0000:00:03.0: PCI INT A disabled
Oct 28 03:54:42 pbx user.info kernel: pci 0000:00:03.1: PCI INT B -> GSI 21 
(level, low) -> IRQ 21
Oct 28 03:54:42 pbx user.info kernel: pci 0000:00:03.1: PCI INT B disabled
Oct 28 03:54:42 pbx user.info kernel: pci 0000:00:03.3: PCI INT D -> GSI 23 
(level, low) -> IRQ 23
Oct 28 03:54:42 pbx user.info kernel: pci 0000:00:03.3: PCI INT D disabled
Oct 28 03:54:42 pbx user.debug kernel: pci 0000:01:00.0: Boot video device
Oct 28 03:54:42 pbx user.debug kernel: PCI: CLS 32 bytes, default 64
Oct 28 03:54:42 pbx user.info kernel: Trying to unpack rootfs image as 
initramfs...
Oct 28 03:54:42 pbx user.info kernel: rootfs image is not initramfs (no cpio 
magic); looks like an initrd
Oct 28 03:54:42 pbx user.info kernel: Freeing initrd memory: 1880k freed
Oct 28 03:54:42 pbx user.info kernel: Simple Boot Flag at 0x3a set to 0x1
Oct 28 03:54:42 pbx user.warn kernel: highmem bounce pool size: 64 pages
Oct 28 03:54:42 pbx user.info kernel: squashfs: version 4.0 (2009/01/31) 
Phillip Lougher
Oct 28 03:54:42 pbx user.info kernel: Registering unionfs 2.6 (for 3.2.62)
Oct 28 03:54:42 pbx user.info kernel: msgmni has been set to 1749
Oct 28 03:54:42 pbx user.info kernel: Block layer SCSI generic (bsg) driver 
version 0.4 loaded (major 254)
Oct 28 03:54:42 pbx user.info kernel: io scheduler noop registered
Oct 28 03:54:42 pbx user.info kernel: io scheduler deadline registered
Oct 28 03:54:42 pbx user.info kernel: io scheduler cfq registered (default)
Oct 28 03:54:42 pbx user.info kernel: input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Oct 28 03:54:42 pbx user.info kernel: ACPI: Power Button [PWRB]
Oct 28 03:54:42 pbx user.info kernel: input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Oct 28 03:54:42 pbx user.info kernel: ACPI: Power Button [PWRF]
Oct 28 03:54:42 pbx user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ 
sharing enabled
Oct 28 03:54:42 pbx user.info kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) 
is a 16550A
Oct 28 03:54:42 pbx user.info kernel: 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 
16550A
Oct 28 03:54:42 pbx user.info kernel: brd: module loaded
Oct 28 03:54:42 pbx user.info kernel: loop: module loaded
Oct 28 03:54:42 pbx user.notice kernel: aic94xx: Adaptec aic94xx SAS/SATA 
driver version 1.0.3 loaded
Oct 28 03:54:42 pbx user.info kernel: megasas: 00.00.06.12-rc1 Wed. Oct. 5 
17:00:00 PDT 2011
Oct 28 03:54:42 pbx user.warn kernel: 3ware Storage Controller device driver 
for Linux v1.26.02.003.
Oct 28 03:54:42 pbx user.warn kernel: 3ware 9000 Storage Controller device 
driver for Linux v2.26.02.014.
Oct 28 03:54:42 pbx user.debug kernel: pata_sis 0000:00:02.5: version 0.5.2
Oct 28 03:54:42 pbx user.info kernel: pata_sis 0000:00:02.5: SiS 962/963 MuTIOL 
IDE UDMA133 controller
Oct 28 03:54:42 pbx user.info kernel: scsi0 : pata_sis
Oct 28 03:54:42 pbx user.info kernel: scsi1 : pata_sis
Oct 28 03:54:42 pbx user.info kernel: ata1: PATA max UDMA/133 cmd 0x1f0 ctl 
0x3f6 bmdma 0xa400 irq 14
Oct 28 03:54:42 pbx user.info kernel: ata2: PATA max UDMA/133 cmd 0x170 ctl 
0x376 bmdma 0xa408 irq 15
Oct 28 03:54:42 pbx user.info kernel: Fusion MPT base driver 3.04.20
Oct 28 03:54:42 pbx user.info kernel: Copyright (c) 1999-2008 LSI Corporation
Oct 28 03:54:42 pbx user.info kernel: Fusion MPT SPI Host driver 3.04.20
Oct 28 03:54:42 pbx user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host 
Controller (EHCI) Driver
Oct 28 03:54:42 pbx user.info kernel: ehci_hcd 0000:00:03.3: PCI INT D -> GSI 
23 (level, low) -> IRQ 23
Oct 28 03:54:42 pbx user.info kernel: ehci_hcd 0000:00:03.3: EHCI Host 
Controller
Oct 28 03:54:42 pbx user.info kernel: ehci_hcd 0000:00:03.3: new USB bus 
registered, assigned bus number 1
Oct 28 03:54:42 pbx user.info kernel: ehci_hcd 0000:00:03.3: irq 23, io mem 
0xe6000000
Oct 28 03:54:42 pbx user.info kernel: ehci_hcd 0000:00:03.3: USB 2.0 started, 
EHCI 1.00
Oct 28 03:54:42 pbx user.info kernel: hub 1-0:1.0: USB hub found
Oct 28 03:54:42 pbx user.info kernel: hub 1-0:1.0: 6 ports detected
Oct 28 03:54:42 pbx user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller 
(OHCI) Driver
Oct 28 03:54:42 pbx user.info kernel: ohci_hcd 0000:00:03.0: PCI INT A -> GSI 
20 (level, low) -> IRQ 9
Oct 28 03:54:42 pbx user.info kernel: ohci_hcd 0000:00:03.0: OHCI Host 
Controller
Oct 28 03:54:42 pbx user.info kernel: ohci_hcd 0000:00:03.0: new USB bus 
registered, assigned bus number 2
Oct 28 03:54:42 pbx user.info kernel: ohci_hcd 0000:00:03.0: irq 9, io mem 
0xe7000000
Oct 28 03:54:42 pbx user.info kernel: hub 2-0:1.0: USB hub found
Oct 28 03:54:42 pbx user.info kernel: hub 2-0:1.0: 3 ports detected
Oct 28 03:54:42 pbx user.info kernel: ohci_hcd 0000:00:03.1: PCI INT B -> GSI 
21 (level, low) -> IRQ 21
Oct 28 03:54:42 pbx user.info kernel: ohci_hcd 0000:00:03.1: OHCI Host 
Controller
Oct 28 03:54:42 pbx user.info kernel: ohci_hcd 0000:00:03.1: new USB bus 
registered, assigned bus number 3
Oct 28 03:54:42 pbx user.info kernel: ohci_hcd 0000:00:03.1: irq 21, io mem 
0xe6800000
Oct 28 03:54:42 pbx user.info kernel: hub 3-0:1.0: USB hub found
Oct 28 03:54:42 pbx user.info kernel: hub 3-0:1.0: 3 ports detected
Oct 28 03:54:42 pbx user.info kernel: uhci_hcd: USB Universal Host Controller 
Interface driver
Oct 28 03:54:42 pbx user.info kernel: Initializing USB Mass Storage driver...
Oct 28 03:54:42 pbx user.info kernel: usbcore: registered new interface driver 
usb-storage
Oct 28 03:54:42 pbx user.info kernel: USB Mass Storage support registered.
Oct 28 03:54:42 pbx user.info kernel: usbcore: registered new interface driver 
ums-datafab
Oct 28 03:54:42 pbx user.info kernel: usbcore: registered new interface driver 
ums-freecom
Oct 28 03:54:42 pbx user.info kernel: usbcore: registered new interface driver 
ums-isd200
Oct 28 03:54:42 pbx user.info kernel: usbcore: registered new interface driver 
ums-jumpshot
Oct 28 03:54:42 pbx user.info kernel: usbcore: registered new interface driver 
ums-sddr09
Oct 28 03:54:42 pbx user.info kernel: usbcore: registered new interface driver 
ums-sddr55
Oct 28 03:54:42 pbx user.info kernel: usbcore: registered new interface driver 
ums-usbat
Oct 28 03:54:42 pbx user.info kernel: i8042: PNP: PS/2 Controller 
[PNP0303:PS2K] at 0x60,0x64 irq 1
Oct 28 03:54:42 pbx user.warn kernel: i8042: PNP: PS/2 appears to have AUX port 
disabled, if this is incorrect please boot with i8042.nopnp
Oct 28 03:54:42 pbx user.info kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 28 03:54:42 pbx user.info kernel: mousedev: PS/2 mouse device common for 
all mice
Oct 28 03:54:42 pbx user.info kernel: input: PC Speaker as 
/devices/platform/pcspkr/input/input2
Oct 28 03:54:42 pbx user.info kernel: cpuidle: using governor ladder
Oct 28 03:54:42 pbx user.info kernel: usbcore: registered new interface driver 
usbhid
Oct 28 03:54:42 pbx user.info kernel: usbhid: USB HID core driver
Oct 28 03:54:42 pbx user.info kernel: TCP cubic registered
Oct 28 03:54:42 pbx user.info kernel: NET: Registered protocol family 17
Oct 28 03:54:42 pbx user.notice kernel: Registering the dns_resolver key type
Oct 28 03:54:42 pbx user.info kernel: Using IPI No-Shortcut mode
Oct 28 03:54:42 pbx user.info kernel: input: AT Translated Set 2 keyboard as 
/devices/platform/i8042/serio0/input/input3
Oct 28 03:54:42 pbx user.info kernel: ata1.00: ATA-7: SAMSUNG HD300LD, 
WK100-12, max UDMA/100
Oct 28 03:54:42 pbx user.info kernel: ata1.00: 586072368 sectors, multi 16: 
LBA48 
Oct 28 03:54:42 pbx user.info kernel: ata1.00: configured for UDMA/100
Oct 28 03:54:42 pbx user.notice kernel: scsi 0:0:0:0: Direct-Access     ATA     
 SAMSUNG HD300LD  WK10 PQ: 0 ANSI: 5
Oct 28 03:54:42 pbx user.notice kernel: sd 0:0:0:0: [sda] 586072368 512-byte 
logical blocks: (300 GB/279 GiB)
Oct 28 03:54:42 pbx user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 28 03:54:42 pbx user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 28 03:54:42 pbx user.notice kernel: sd 0:0:0:0: [sda] Write cache: enabled, 
read cache: enabled, doesn't support DPO or FUA
Oct 28 03:54:42 pbx user.info kernel:  sda: sda1 sda2
Oct 28 03:54:42 pbx user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Oct 28 03:54:42 pbx user.info kernel: ata2.00: ATAPI: PIONEER DVD-RW  DVR-116D, 
1.06, max UDMA/66
Oct 28 03:54:42 pbx user.info kernel: ata2.01: ATAPI: ASUS    CD-S520/A, 2.0K, 
max UDMA/33
Oct 28 03:54:42 pbx user.info kernel: ata2.00: configured for UDMA/66
Oct 28 03:54:42 pbx user.info kernel: ata2.01: configured for UDMA/33
Oct 28 03:54:42 pbx user.notice kernel: scsi 1:0:0:0: CD-ROM            PIONEER 
 DVD-RW  DVR-116D 1.06 PQ: 0 ANSI: 5
Oct 28 03:54:42 pbx user.notice kernel: scsi 1:0:1:0: CD-ROM            ASUS    
 CD-S520/A        2.0K PQ: 0 ANSI: 5
Oct 28 03:54:42 pbx user.notice kernel: RAMDISK: gzip image found at block 0
Oct 28 03:54:42 pbx user.info kernel: VFS: Mounted root (ext2 filesystem) on 
device 1:0.
Oct 28 03:54:42 pbx user.info kernel: devtmpfs: mounted
Oct 28 03:54:42 pbx user.info kernel: Freeing unused kernel memory: 328k freed
Oct 28 03:54:42 pbx user.info kernel: Write protecting the kernel text: 2688k
Oct 28 03:54:42 pbx user.info kernel: Write protecting the kernel read-only 
data: 976k
Oct 28 03:54:42 pbx user.info kernel: Refined TSC clocksource calibration: 
2659.999 MHz.
Oct 28 03:54:42 pbx user.info kernel: Switching to clocksource tsc
Oct 28 03:54:42 pbx user.err kernel: 0>udevd[159]: starting version 173
Oct 28 03:54:42 pbx user.info kernel: Real Time Clock Driver v1.12b
Oct 28 03:54:42 pbx user.info kernel: tulip: Linux Tulip driver version 1.1.15 
(Feb 27, 2007)
Oct 28 03:54:42 pbx user.info kernel: e100: Intel(R) PRO/100 Network Driver, 
3.5.24-k2-NAPI
Oct 28 03:54:42 pbx user.info kernel: e100: Copyright(c) 1999-2006 Intel 
Corporation
Oct 28 03:54:42 pbx user.info kernel: natsemi dp8381x driver, version 2.1, Sept 
11, 2006
Oct 28 03:54:42 pbx user.info kernel:   originally by Donald Becker 
<bec...@scyld.com>
Oct 28 03:54:42 pbx user.info kernel:   2.4.x kernel port by Jeff Garzik, 
Tjeerd Mulder
Oct 28 03:54:42 pbx user.info kernel: 8139too: 8139too Fast Ethernet driver 
0.9.28
Oct 28 03:54:42 pbx user.info kernel: 8139too 0000:00:0e.0: PCI INT A -> GSI 17 
(level, low) -> IRQ 17
Oct 28 03:54:42 pbx user.info kernel: 8139too 0000:00:0e.0: eth0: RealTek 
RTL8139 at 0xf80be000, 00:08:54:16:aa:2e, IRQ 17
Oct 28 03:54:42 pbx user.info kernel: via_rhine: v1.10-LK1.5.1 2010-10-09 
Written by Donald Becker
Oct 28 03:54:42 pbx user.info kernel: VMware vmxnet3 virtual NIC driver - 
version 1.1.29.0-k-NAPI
Oct 28 03:54:42 pbx user.info kernel: pcnet32: pcnet32.c:v1.35 21.Apr.2008 
tsbog...@alpha.franken.de
Oct 28 03:54:42 pbx user.info kernel: e1000: Intel(R) PRO/1000 Network Driver - 
version 7.3.21-k8-NAPI
Oct 28 03:54:42 pbx user.info kernel: e1000: Copyright (c) 1999-2006 Intel 
Corporation.
Oct 28 03:54:42 pbx user.info kernel: e1000e: Intel(R) PRO/1000 Network Driver 
- 3.1.0.2-NAPI
Oct 28 03:54:42 pbx user.info kernel: e1000e: Copyright(c) 1999 - 2014 Intel 
Corporation.
Oct 28 03:54:42 pbx user.info kernel: Intel(R) Gigabit Ethernet Network Driver 
- version 5.2.9.3
Oct 28 03:54:42 pbx user.info kernel: Copyright (c) 2007-2014 Intel Corporation.
Oct 28 03:54:42 pbx user.info kernel: ns83820.c: National Semiconductor DP83820 
10/100/1000 driver.
Oct 28 03:54:42 pbx user.info kernel: dahdi: Version: 2.8.0.1
Oct 28 03:54:42 pbx user.info kernel: dahdi: Telephony Interface Registered on 
major 196
Oct 28 03:54:42 pbx daemon.info udhcpc[268]: udhcpc (v1.19.4) started
Oct 28 03:54:42 pbx user.info kernel: 8139too 0000:00:0e.0: eth0: link down
Oct 28 03:54:42 pbx daemon.info udhcpc[268]: Sending discover...
Oct 28 03:54:44 pbx daemon.info udhcpc[268]: Sending discover...
Oct 28 03:54:46 pbx daemon.info udhcpc[268]: Sending discover...
Oct 28 03:54:48 pbx daemon.info udhcpc[268]: Sending discover...
Oct 28 03:54:50 pbx daemon.info udhcpc[268]: Sending discover...
Oct 28 03:54:52 pbx daemon.info udhcpc[268]: Sending discover...
Oct 28 03:54:54 pbx daemon.info udhcpc[268]: No lease, forking to background
Oct 28 03:54:54 pbx daemon.err ifplugd(eth0): started: BusyBox v1.19.4 
(2014-10-01 11:23:41 CDT)
Oct 28 03:54:54 pbx daemon.err ifplugd(eth0): using SIOCETHTOOL detection mode
Oct 28 03:54:54 pbx daemon.err ifplugd(eth0): link is down
Oct 28 03:54:55 pbx cron.info crond[286]: crond: crond (busybox 1.19.4) 
started, log level 8
Oct 28 03:54:55 pbx daemon.info dnsmasq[314]: started, version 2.71 cachesize 
2048
Oct 28 03:54:55 pbx daemon.info dnsmasq[314]: compile time options: IPv6 
GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack no-ipset 
auth no-DNSSEC
Oct 28 03:54:55 pbx daemon.info dnsmasq-tftp[314]: TFTP root is /tftpboot 
Oct 28 03:54:55 pbx daemon.info dnsmasq[314]: using local addresses only for 
domain astlinux
Oct 28 03:54:55 pbx daemon.warn dnsmasq[314]: failed to access 
/etc/resolv-extern.conf: No such file or directory
Oct 28 03:54:55 pbx daemon.info dnsmasq[314]: read /etc/hosts - 2 addresses
Oct 28 03:54:55 pbx daemon.info acpid: starting up with proc fs
Oct 28 03:54:55 pbx daemon.info acpid: 1 rule loaded
Oct 28 03:54:55 pbx daemon.info acpid: waiting for events: event logging is off
Oct 28 03:54:55 pbx daemon.notice sntp[321]: Started sntp
Oct 28 03:54:55 pbx daemon.debug sntp[321]: Error looking up (A) 
us.pool.ntp.org: Name or service not known
Oct 28 03:54:55 pbx auth.info sshd[341]: Server listening on 0.0.0.0 port 22.
Oct 28 03:54:56 pbx local0.notice asterisk[374]: NOTICE[374]: cdr.c:1622 in 
do_reload: CDR simple logging enabled.
Oct 28 03:54:56 pbx local0.notice asterisk[374]: NOTICE[374]: loader.c:1208 in 
load_modules: 216 modules will be loaded.
Oct 28 03:54:56 pbx local0.notice asterisk[374]: NOTICE[374]: res_odbc.c:1899 
in load_module: res_odbc loaded.
Oct 28 03:54:56 pbx local0.notice asterisk[374]: NOTICE[374]: res_smdi.c:1418 
in load_module: No SMDI interfaces are available to listen on, not starting 
SMDI listener.
Oct 28 03:54:56 pbx local0.notice asterisk[374]: NOTICE[374]: config.c:2507 in 
ast_config_engine_register: Registered Config Engine sqlite3
Oct 28 03:54:56 pbx local0.notice asterisk[374]: NOTICE[374]: config.c:2507 in 
ast_config_engine_register: Registered Config Engine odbc
Oct 28 03:54:56 pbx local0.notice asterisk[374]: NOTICE[374]: config.c:2507 in 
ast_config_engine_register: Registered Config Engine curl
Oct 28 03:54:56 pbx local0.warn asterisk[374]: WARNING[374]: 
res_musiconhold.c:1950 in load_module: No music on hold classes configured, 
disabling music on hold.
Oct 28 03:54:56 pbx local0.notice asterisk[374]: NOTICE[374]: 
chan_skinny.c:7736 in config_load: Configuring skinny from skinny.conf
Oct 28 03:54:56 pbx local0.err asterisk[374]: ERROR[374]: chan_motif.c:2499 in 
custom_connection_handler: Connection 'local-jabber-account' configured on 
endpoint 'jingle-endpoint' could not be found
Oct 28 03:54:56 pbx local0.err asterisk[374]: ERROR[374]: config_options.c:599 
in aco_process_var: Error parsing connection=local-jabber-account at line 81 of 
Oct 28 03:54:56 pbx local0.err asterisk[374]: ERROR[374]: config_options.c:402 
in process_category: In motif.conf: Processing options for jingle-endpoint 
failed
Oct 28 03:54:56 pbx local0.err asterisk[374]: ERROR[374]: chan_motif.c:2565 in 
load_module: Unable to read config file motif.conf. Not loading module.
Oct 28 03:54:56 pbx local0.warn asterisk[374]: WARNING[374]: chan_dahdi.c:18700 
in process_dahdi: Ignoring any changes to 'userbase' (on reload) at line 23.
Oct 28 03:54:56 pbx local0.warn asterisk[374]: WARNING[374]: chan_dahdi.c:18700 
in process_dahdi: Ignoring any changes to 'vmsecret' (on reload) at line 31.
Oct 28 03:54:56 pbx local0.warn asterisk[374]: WARNING[374]: chan_dahdi.c:18700 
in process_dahdi: Ignoring any changes to 'hassip' (on reload) at line 35.
Oct 28 03:54:56 pbx local0.warn asterisk[374]: WARNING[374]: chan_dahdi.c:18700 
in process_dahdi: Ignoring any changes to 'hasiax' (on reload) at line 39.
Oct 28 03:54:56 pbx local0.warn asterisk[374]: WARNING[374]: chan_dahdi.c:18700 
in process_dahdi: Ignoring any changes to 'hasmanager' (on reload) at line 47.
Oct 28 03:54:56 pbx local0.notice asterisk[374]: NOTICE[374]: cel_custom.c:95 
in load_config: No mappings found in cel_custom.conf. Not logging CEL to custom 
CSVs.
Oct 28 03:54:56 pbx daemon.err lighttpd[428]: (log.c.164) server started 
Oct 28 03:54:56 pbx local0.err asterisk[374]: ERROR[374]: codec_dahdi.c:623 in 
find_transcoders: Failed to open /dev/dahdi/transcode: No such file or directory
Oct 28 03:54:57 pbx local0.notice asterisk[374]: NOTICE[374]: pbx_ael.c:164 in 
pbx_load_module: Starting AEL load process.
Oct 28 03:54:57 pbx local0.notice asterisk[374]: NOTICE[374]: pbx_ael.c:177 in 
pbx_load_module: AEL load process: parsed config file name 
'/etc/asterisk/extensions.ael'.
Oct 28 03:54:57 pbx local0.notice asterisk[374]: NOTICE[374]: pbx_ael.c:180 in 
pbx_load_module: AEL load process: checked config file name 
'/etc/asterisk/extensions.ael'.
Oct 28 03:54:57 pbx local0.notice asterisk[374]: NOTICE[374]: pbx_ael.c:187 in 
pbx_load_module: AEL load process: compiled config file name 
'/etc/asterisk/extensions.ael'.
Oct 28 03:54:57 pbx local0.notice asterisk[374]: NOTICE[374]: pbx_ael.c:192 in 
pbx_load_module: AEL load process: merged config file name 
'/etc/asterisk/extensions.ael'.
Oct 28 03:54:57 pbx local0.notice asterisk[374]: NOTICE[374]: pbx_ael.c:195 in 
pbx_load_module: AEL load process: verified config file name 
'/etc/asterisk/extensions.ael'.
Oct 28 03:54:57 pbx daemon.err mDNSResponder: ConstructServiceName: Application 
protocol name must begin with underscore: _ssh._tcp.22.local.
Oct 28 03:54:57 pbx daemon.err mDNSResponder: ConstructServiceName: Application 
protocol name must begin with underscore: _https._tcp.443.local.
Oct 28 03:54:58 pbx daemon.info init: starting pid 477, tty '/dev/console': 
'/sbin/getty -L 19200 /dev/tty1 linux'
Oct 28 03:55:03 pbx auth.info login[477]: root login on 'tty1'
Oct 28 03:55:14 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:55:16 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:55:18 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:55:20 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:55:22 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:55:24 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:55:46 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:55:48 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:55:50 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:55:52 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:55:54 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:55:56 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:56:18 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:56:20 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:56:22 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:56:24 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:56:26 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:56:28 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:56:50 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:56:52 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:56:54 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:56:55 pbx daemon.notice sntp[494]: Started sntp
Oct 28 03:56:55 pbx daemon.debug sntp[494]: Error looking up (A) 
us.pool.ntp.org: Name or service not known
Oct 28 03:56:56 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:56:58 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:57:00 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:57:22 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:57:24 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:57:26 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:57:28 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:57:30 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:57:32 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:57:54 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:57:56 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:57:58 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:58:00 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:58:01 pbx user.info kernel: usb 1-5: new high-speed USB device number 
2 using ehci_hcd
Oct 28 03:58:01 pbx user.info kernel: scsi2 : usb-storage 1-5:1.0
Oct 28 03:58:02 pbx user.notice kernel: scsi 2:0:0:0: Direct-Access             
 USB DISK 2.0     PMAP PQ: 0 ANSI: 4
Oct 28 03:58:02 pbx user.notice kernel: sd 2:0:0:0: [sdb] 3851424 512-byte 
logical blocks: (1.97 GB/1.83 GiB)
Oct 28 03:58:02 pbx user.notice kernel: sd 2:0:0:0: [sdb] Write Protect is off
Oct 28 03:58:02 pbx user.debug kernel: sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
Oct 28 03:58:02 pbx user.err kernel: sd 2:0:0:0: [sdb] No Caching mode page 
found
Oct 28 03:58:02 pbx user.err kernel: sd 2:0:0:0: [sdb] Assuming drive cache: 
write through
Oct 28 03:58:02 pbx user.err kernel: sd 2:0:0:0: [sdb] No Caching mode page 
found
Oct 28 03:58:02 pbx user.err kernel: sd 2:0:0:0: [sdb] Assuming drive cache: 
write through
Oct 28 03:58:02 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:58:03 pbx user.info kernel:  sdb: sdb1
Oct 28 03:58:03 pbx user.err kernel: sd 2:0:0:0: [sdb] No Caching mode page 
found
Oct 28 03:58:03 pbx user.err kernel: sd 2:0:0:0: [sdb] Assuming drive cache: 
write through
Oct 28 03:58:03 pbx user.notice kernel: sd 2:0:0:0: [sdb] Attached SCSI 
removable disk
Oct 28 03:58:04 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:58:27 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:58:29 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:58:31 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:58:33 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:58:35 pbx daemon.info udhcpc[274]: Sending discover...
Oct 28 03:58:37 pbx daemon.info udhcpc[274]: Sending discover...
Module                  Size  Used by
dahdi                 178581  0 
skge                   22296  0 
tg3                   128393  0 
r8169                  29864  0 
r8168                 251494  0 
ns83820                11988  0 
igb                   141481  0 
hwmon                    866  2 tg3,igb
e1000e                158798  0 
e1000                  72046  0 
acenic                 18832  0 
pcnet32                21292  0 
vmxnet3                25535  0 
via_velocity           18376  0 
via_rhine              14748  0 
8139too                11908  0 
forcedeth              37788  0 
natsemi                16720  0 
e100                   18820  0 
tulip                  36079  0 
typhoon                14804  0 
3c59x                  24180  0 
mii                     2724  6 r8169,pcnet32,via_rhine,8139too,e100,3c59x
rtc                     3628  0 
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 651 Host (rev 02)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual 
PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] 
LPC Controller (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2/3 SMBus controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 
AC'97 Sound Controller (rev a0)
00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller 
(rev 0f)
00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller 
(rev 0f)
00:03.3 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast 
Ethernet (rev 91)
00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 Network controller: First Wise Media GmbH HFC-S PCI A [X-TENSIONS 
XC-520] (rev 02)
00:10.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN 
interface
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 
65x/M650/740 PCI/AGP VGA Display Adapter
------------------------------------------------------------------------------
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to 
pay...@krisk.org.

Reply via email to