So I don't know what the problem was exactly but I am now working again. I
tried plugging in a USB memory stick to the AstLinux box and it was not
recognized either so I decided to do a hard reboot (disconnect the power
after a shutdown, wait 10 seconds, connect power again). That solved the
problem. Whatever state it had got into just doing a soft reboot did not
correct it...
pbx ~ # lsusb
Bus 001 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 051d:0002 American Power Conversion Uninterruptible
Power Supply
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pbx ~ # dmesg | grep usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-1: new high-speed USB device number 2 using ehci_hcd
usb 2-1: new low-speed USB device number 2 using xhci_hcd
usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80
microframes
generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American
Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on
usb-0000:00:10.0-1/input0
pbx ~ #
Thanks,
David
On Sat, Jul 9, 2016 at 10:11 AM, Lonnie Abelbeck <li...@lonnie.abelbeck.com>
wrote:
> David,
>
> I just tested a APC "Back-UPS NS1080G" on my APU2 and it works fine.
> -- web interface --
> Model Status Utility UPS Load Battery Chg. Batt. Runtime
> Back-UPS NS1080G OL 119.0 Volts 0 % 100 % 775 Minutes
>
> Recent UPS Events:
> ==================
> 2016-07-09 08:53:56 - Network UPS Tools upsmon 2.7.4 started
> --
> # lsusb
> Bus 001 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 002 Device 002: ID 051d:0002 American Power Conversion Uninterruptible
> Power Supply
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> --
> # dmesg | grep usb
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> usbcore: registered new interface driver usb-storage
> usbcore: registered new interface driver ums-datafab
> usbcore: registered new interface driver ums-freecom
> usbcore: registered new interface driver ums-isd200
> usbcore: registered new interface driver ums-jumpshot
> usbcore: registered new interface driver ums-sddr09
> usbcore: registered new interface driver ums-sddr55
> usbcore: registered new interface driver ums-usbat
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> usb 1-1: new high-speed USB device number 2 using ehci_hcd
> usb 2-1: new full-speed USB device number 2 using xhci_hcd
> usb 2-1: ep 0x81 - rounding interval to 512 microframes, ep desc says 800
> microframes
> generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.00 Device [American
> Power Conversion Back-UPS NS1080G FW:914.L1 .D USB FW:L1 ] on
> usb-0000:00:10.0-1/input0
> --
>
> If this is your APU2, then your custom build kernel does not have USB 3.0
> enabled ( CONFIG_USB_XHCI_HCD=y ). Notice the "Linux Foundation 3.0 root
> hub" and "new full-speed USB device number 2 using xhci_hcd" above.
>
> The APU2 external USB ports require USB 3.0 kernel drivers.
>
> Lonnie
>
>
> On Jul 8, 2016, at 9:55 PM, David Kerr <da...@kerr.net> wrote:
>
> > Lonnie,
> > The UPS seems to be okay, I plugged the USB cable into my MacBook...
> >
> > Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 :
> >
> > Product ID: 0x0002
> > Vendor ID: 0x051d (American Power Conversion)
> > Version: 1.06
> > Serial Number: JB0521019999
> > Speed: Up to 1.5 Mb/sec
> > Manufacturer: American Power Conversion
> > Location ID: 0x14200000 / 8
> > Current Available (mA): 1000
> > Current Required (mA): 24
> > Extra Operating Current (mA): 0
> >
> > And OS X recognizes it as valid UPS. I can also pull the plug on it and
> it switches over to battery power just fine.
> >
> > Plugging it back into AstLinux and it is not seen by the USB drivers...
> >
> > pbx ~ # lsusb
> > Bus 001 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
> > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> > pbx ~ #
> >
> > I also looked at the boot messages...
> >
> > pbx ~ # dmesg | grep usb
> > usbcore: registered new interface driver usb-storage
> > usbcore: registered new interface driver ums-datafab
> > usbcore: registered new interface driver ums-freecom
> > usbcore: registered new interface driver ums-isd200
> > usbcore: registered new interface driver ums-jumpshot
> > usbcore: registered new interface driver ums-sddr09
> > usbcore: registered new interface driver ums-sddr55
> > usbcore: registered new interface driver ums-usbat
> > usb 1-1: new high-speed USB device number 2 using ehci_hcd
> > usbcore: registered new interface driver usbhid
> > usbhid: USB HID core driver
> > pbx ~ #
> >
> > No errors there, but neither has it loaded usbhid-usb driver. What do
> you see on your system?
> >
> > Bit of a head scratcher.
> >
> > Thanks,
> > David
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > On Fri, Jul 8, 2016 at 9:44 PM, Lonnie Abelbeck <
> li...@lonnie.abelbeck.com> wrote:
> > Hi David,
> >
> > Are you certain you got the replacement battery connected with the
> correct polarity ?
> >
> > Does "lsusb" show the UPS ?
> > --
> > # lsusb
> > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> > Bus 002 Device 002: ID 051d:0002 American Power Conversion
> Uninterruptible Power Supply
> > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> > --
> >
> > Sound like a hardware-physics thing given it was working before
> replacing the battery.
> >
> > Out of curiosity, what is the UPS model ?
> >
> > Lonnie
> >
> >
> >
> > On Jul 8, 2016, at 7:06 PM, David Kerr <da...@kerr.net> wrote:
> >
> > > I just replaced the batteries in my UPS and now my log file is filling
> up with error messages...
> > >
> > > Jul 8 19:18:32 pbx daemon.err upsmon[13287]: Poll UPS [ups@localhost]
> failed - Driver not connected
> > > Jul 8 19:18:37 pbx daemon.err upsmon[13287]: Poll UPS [ups@localhost]
> failed - Driver not connected
> > > Jul 8 19:18:42 pbx daemon.err upsmon[13287]: Poll UPS [ups@localhost]
> failed - Driver not connected
> > > Jul 8 19:18:47 pbx daemon.info upsmon[13287]: Signal 15: exiting
> > > Jul 8 19:18:47 pbx daemon.info upsd[13282]: User master@::1 logged
> out from UPS [ups]
> > > Jul 8 19:18:47 pbx daemon.err upsmon[13285]: upsmon parent: read
> > > Jul 8 19:18:47 pbx daemon.err upsd[13282]: mainloop: Interrupted
> system call
> > > Jul 8 19:18:47 pbx daemon.info upsd[13282]: Signal 15: exiting
> > > Jul 8 19:18:48 pbx daemon.info upsd[14111]: listening on ::1 port
> 3493
> > > Jul 8 19:18:48 pbx daemon.info upsd[14111]: listening on 127.0.0.1
> port 3493
> > > Jul 8 19:18:48 pbx daemon.err upsd[14111]: Can't connect to UPS [ups]
> (usbhid-ups-ups): No such file or directory
> > > Jul 8 19:18:48 pbx daemon.info upsd[14112]: Startup successful
> > > Jul 8 19:18:48 pbx daemon.info upsmon[14115]: Startup successful
> > > Jul 8 19:18:48 pbx daemon.info upsd[14112]: User master@::1 logged
> into UPS [ups]
> > > Jul 8 19:18:48 pbx daemon.err upsmon[14117]: Poll UPS [ups@localhost]
> failed - Driver not connected
> > > Jul 8 19:18:48 pbx daemon.notice upsmon[14117]: Communications with
> UPS ups@localhost lost
> > > Jul 8 19:18:49 pbx mail.info msmtp: host=smtp.gmail.com tls=on
> auth=on user=p...@mydomain.org from=r...@mydomain.org recipients=
> da...@mydomain.org mailsize=352 smtpstatus=250 smtpmsg='250 2.0.0 OK
> 1468019929 n89sm637881qte.38 - gsmtp' exitcode=EX_OK
> > > Jul 8 19:18:49 pbx mail.info msmtpqueue: Success: /var/spool/mail/
> 2016-07-08-19.18.48-0.msmtp
> > > Jul 8 19:18:53 pbx daemon.err upsmon[14117]: Poll UPS [ups@localhost]
> failed - Driver not connected
> > > Jul 8 19:18:53 pbx daemon.notice upsmon[14117]: UPS ups@localhost is
> unavailable
> > > Jul 8 19:18:58 pbx daemon.err upsmon[14117]: Poll UPS [ups@localhost]
> failed - Driver not connected
> > > Jul 8 19:19:03 pbx daemon.err upsmon[14117]: Poll UPS [ups@localhost]
> failed - Driver not connected
> > > Jul 8 19:19:08 pbx daemon.err upsmon[14117]: Poll UPS [ups@localhost]
> failed - Driver not connected
> > >
> > >
> > > The "signal 15" is me restarting the UPS monitor. The "driver not
> connected" messages are filling up my log file.
> > >
> > > I have checked the cables, made sure they are properly connected. I
> have rebooted AstLinux. But still I get these messages.
> > >
> > > Does anyone have a suggestion of what to look for?
> > >
> > > Thanks,
> > > David
> > >
> > >
> > >
> ------------------------------------------------------------------------------
> > > Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> > > Francisco, CA to explore cutting-edge tech and listen to tech
> luminaries
> > > present their vision of the future. This family event has something for
> > > everyone, including kids. Get more information and register today.
> > >
> http://sdm.link/attshape_______________________________________________
> > > Astlinux-users mailing list
> > > Astlinux-users@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/astlinux-users
> > >
> > > Donations to support AstLinux are graciously accepted via PayPal to
> pay...@krisk.org.
> >
> >
> >
> ------------------------------------------------------------------------------
> > Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> > Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> > present their vision of the future. This family event has something for
> > everyone, including kids. Get more information and register today.
> > http://sdm.link/attshape
> > _______________________________________________
> > Astlinux-users mailing list
> > Astlinux-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/astlinux-users
> >
> > Donations to support AstLinux are graciously accepted via PayPal to
> pay...@krisk.org.
> >
> >
> ------------------------------------------------------------------------------
> > Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> > Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> > present their vision of the future. This family event has something for
> > everyone, including kids. Get more information and register today.
> > http://sdm.link/attshape_______________________________________________
> > Astlinux-users mailing list
> > Astlinux-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/astlinux-users
> >
> > Donations to support AstLinux are graciously accepted via PayPal to
> pay...@krisk.org.
>
>
>
> ------------------------------------------------------------------------------
> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> present their vision of the future. This family event has something for
> everyone, including kids. Get more information and register today.
> http://sdm.link/attshape
> _______________________________________________
> Astlinux-users mailing list
> Astlinux-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to
> pay...@krisk.org.
>
------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
