On Jul 23, 2017, at 12:11 PM, Roberto Rivera <rrivera...@gmail.com> wrote:
> I'm using a Alix board for a pbx. I want to assign it a static up address but > I'm can't see the device on my Netgear list of devices. How can I obtain a IP > address to be able to log into your web interface. > Thanks Roberto, If your web browser is on the same subnet as the Alix's (eth0) interface, try 'pbx.local' to use mDNS (Bonjour) zeroconf to access the AstLinux web interface for setup. This should work with OS-X, Chromebooks, not sure about Windows. Better, would be to connect a serial cable to the Alix's serial port (38400 8N1) and after it boots up the IPv4 address will be displayed (if available), or log in with the default credentials and issue "ip a" to determinate the external IPv4 address. Also consider you may have plugged the ethernet cable into eth2 and not the default eth0 interface. Lonnie ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
