> Am 23.07.2017 um 20:25 schrieb Lonnie Abelbeck <li...@lonnie.abelbeck.com>: > > > On Jul 23, 2017, at 12:11 PM, Roberto Rivera <rrivera...@gmail.com> wrote: > >> I'm using a Alix board for a pbx. I want to assign it a static up address >> but I'm can't see the device on my Netgear list of devices. How can I obtain >> a IP address to be able to log into your web interface. >> Thanks > > Roberto, > > If your web browser is on the same subnet as the Alix's (eth0) interface, try > 'pbx.local' to use mDNS (Bonjour) zeroconf to access the AstLinux web > interface for setup. This should work with OS-X, Chromebooks, not sure about > Windows. > > Better, would be to connect a serial cable to the Alix's serial port (38400 > 8N1) and after it boots up the IPv4 address will be displayed (if available), > or log in with the default credentials and issue "ip a" to determinate the > external IPv4 address. > > Also consider you may have plugged the ethernet cable into eth2 and not the > default eth0 interface. > > Lonnie
eth0 is next to the USB ports: https://wiki.openwrt.org/_detail/media/pcengines/box-closed-front2.jpg?id=toh%3Apcengines%3Aalix Michael http://www.mksolutions.info ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
