> Am 05.09.2017 um 09:16 schrieb Michael Knill > <michael.kn...@ipcsolutions.com.au>: > > Hi group > > I have a bit of a tricky one that I want to run past the Astlinux firewall > experts. > > Scenario: > An existing PBX (soon to be replaced) using an existing SIP Provider sitting > BEHIND an Astlinux appliance which is connected to another SIP Provider. > > Should I just be able to do NAT EXT -> LAN to the internal PBX for 5060 & > Media Ports using the Source IP Addresses of their current provider? Or do I > need to add something in NAT EXT: ? > I just recall that I had issues with Astlinux and forwarding 5060 but that > was a while ago. > > Thanks. > > Regards > Michael Knill
Hi Michael, I had the same issue. It is quite easy: On the PBX behind the main AstLinux box set in sip.conf: ; NAT settings externaddr=xx.xx.xx.xx:5062 ; this tells the second provider to send the returning packets to port 5062! localnet=yy.yy.yy.yy/255.255.255.0 nat=force_rport,comedia Then on the main AstLinux box set NAT EXT -> LAN port 5062 to the IP of the 2nd PBX but on port 5060! Then just use different RTP ports then on the edge box. Michael http://www.mksolutions.info ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.