Oops, I managed to bump CTRL+ENTER. Continuing my response....
When I run the command you mention:
pbx kd # show-union | grep '/etc/rc$'
/oldroot/mnt/asturw/etc/rc
I reverted to the standard /etc/rc using the command you provided, created a
/mnt/kd/rc.elocal, put the mkdir and mount commands there, ran chmod +x on it,
restarted, and now everything is working! dahdi_cfg has ran and my channel
bank is all green. Thank you so much! If only those pesky users would get the
point that is clearly laid out in the documentation, and stop editing /etc/rc!
And to be clear, in my post a few minutes ago, I misstated what I did - I added
lines to /etc/rc to make my hard drive mount, not rc.conf.
Josh
________________________________
From: Josh Alberts <jma...@hotmail.com>
Sent: Tuesday, April 17, 2018 11:00 AM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] Problem Running dahdi_cfg
Hey Lonnie!
I certainly have edited rc.conf, and you caught me! I have an external USB
hard drive (/dev/sdb2) that I use to store recordings of phone calls. I
couldn't figure out how to get it to auto mount, so I ended up adding the
following lines to rc.conf that did the trick:
mkdir /mnt/usbhd
mount /dev/sdb2 /mnt/usbhd
________________________________
From: Lonnie Abelbeck <li...@lonnie.abelbeck.com>
Sent: Tuesday, April 17, 2018 8:47 AM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] Problem Running dahdi_cfg
On Apr 16, 2018, at 11:16 PM, Josh Alberts <jma...@hotmail.com> wrote:
> I'm on astlinux-1.3.2 i686 - Asterisk 13.18.5 and I'm setting up a new
> channel bank. I'm unable to run dahdi_cfg; I get the following error after
> it shows the (correct) channel map as defined in /etc/dahdi/system.conf:
>
> Unable to create 'dahdi_cfg' mutex: Read-only file system
>
> Here is the output of mount:
>
> rootfs on / type rootfs (rw)
> /dev/root on /oldroot type ext2 (rw,relatime)
> devtmpfs on /dev type devtmpfs
> (rw,relatime,size=512k,nr_inodes=221195,mode=755)
> /dev/sda2 on /oldroot/mnt/asturw type ext2 (rw,noatime,errors=continue)
> none on /oldroot/mnt/asturo type tmpfs (ro,relatime,size=114012k)
> none on / type unionfs
> (rw,relatime,dirs=/oldroot/mnt/asturw=rw:/oldroot/mnt/asturo=ro)
> none on /proc type proc (rw,relatime)
> none on /tmp type tmpfs (rw,relatime,size=10000k)
> none on /var type tmpfs (rw,relatime,size=10000k)
> none on /sys type sysfs (rw,relatime)
> none on /dev/pts type devpts (rw,relatime,mode=600)
> /dev/sdb2 on /mnt/usbhd type ext3
> (rw,relatime,errors=continue,barrier=1,data=writeback)
> /dev/sda1 on /oldroot/cdrom type vfat
> (ro,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
>
> I don't really know what's going on. FWIW, the light on my TE122P card is
> out, but it's showing in up dahdi_hardware:
>
> pci:0000:01:06.0 wcte12xp+ d161:8001 Wildcard TE122
>
> And I have DAHDIMODS="wcte12xp" defined in /mnt/kd/rc.conf.d/user.conf. I
> have a feeling I'm doing (or not doing) something silly. Can someone please
> help me figure out why I can't run dahdi_cfg? Thanks!
Hi Josh,
Quick answer, it looks like you have edited the system initialization script
/etc/rc in the past (a no-no :-) ) As such /dev/shm is not getting mounted,
which is generating the "Unable to create 'dahdi_cfg' mutex:".
More specifically ...
Does this command generate any output ?
--
show-union | grep '/etc/rc$'
--
My guess is yes. Assuming so ...
Determine what changes you made relative the of latest official /etc/rc
--
diff -u /oldroot/mnt/asturo/etc/rc /oldroot/mnt/asturw/etc/rc
--
I'm assuming you made changes to mount your /mnt/usbhd as shown above ... a
supported method to do so would be to create a bash script "/mnt/kd/rc.elocal"
make it executable and put any initialization commands there.
If you want to revert to the standard /etc/rc remove your edited version off
unionfs by:
--
rm /oldroot/mnt/asturw/etc/rc
--
(and reboot)
Worst case solution, you could add the one line to your edited /etc/rc that
mounts /dev/shm on tmpfs, (and reboot). Fixes the problem today, causes
problems down the road.
Lonnie
PS, just curious, can you explain why you need/want to mount /dev/sdb2 on
/mnt/usbhd ?
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
