> Am 18.01.2020 um 01:15 schrieb Michael Knill
> <michael.kn...@ipcsolutions.com.au>:
>
> Hi group
>
> Strangely it appears that with all my genx86_64 systems, on multiple astlinux
> versions, I am unable to perform an upgrade from my private repository as it
> comes up with ‘Firmware verification failed’. genx86_vm and genx86_64-serial
> upgrades work fine.
>
> I have tried upgrading to both 1.3.6 and 1.3.7.1 and it does the same thing.
> I have downloaded it multiple times into the repository so I don't believe
> the sha1 file is corrupted.
> It does work however when I point the repository to
> http://mirror.astlinux-project.org/ast13se-firmware-1.x so this indicates
> that there must be something wrong with my repository and I cant for the life
> of me work out what.
>
> So my questions are:
> • Any ideas what this could be and what to try to fix it?
> • How do I show the board type for a system (before it was shown on
> login)?
> • Is there a way I can upgrade to a specific version using the Astlinux
> repository?
> • How can I move to a different board type e.g. all my genx86_64
> systems are on vm’s so they really should be a genx86_vm board type?
>
> Sorry for the lots of questions. Thanks all.
>
> Regards
> Michael Knill
Hi Michael,
short answers to 3. + 4.:
3. it depends on the "ver" file in the repo folder which contains the (latest)
version. E.g. "astlinux-1.3.7.1".
4. You can switch on the commandline between genx86_64 and genx86_64-vm (but
not between serial and vga):
https://doc.astlinux.org/devdoc:devdoc_switch_genx86_64_and_vm
Michael
http://www.mksolutions.info
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
