> On Jan 18, 2020, at 6:06 AM, Michael Keuter <li...@mksolutions.info> wrote:
> 
> 
> 
>> Am 18.01.2020 um 01:15 schrieb Michael Knill 
>> <michael.kn...@ipcsolutions.com.au>:
>> 
>> Hi group
>> 
>> Strangely it appears that with all my genx86_64 systems, on multiple 
>> astlinux versions, I am unable to perform an upgrade from my private 
>> repository as it comes up with ‘Firmware verification failed’. genx86_vm and 
>> genx86_64-serial upgrades work fine. 
>> 
>> I have tried upgrading to both 1.3.6 and 1.3.7.1 and it does the same thing. 
>> I have downloaded it multiple times into the repository so I don't believe 
>> the sha1 file is corrupted.
>> It does work however when I point the repository to 
>> http://mirror.astlinux-project.org/ast13se-firmware-1.x so this indicates 
>> that there must be something wrong with my repository and I cant for the 
>> life of me work out what.
>> 
>> So my questions are:
>>      • Any ideas what this could be and what to try to fix it?
>>      • How do I show the board type for a system (before it was shown on 
>> login)?
>>      • Is there a way I can upgrade to a specific version using the Astlinux 
>> repository?
>>      • How can I move to a different board type e.g. all my genx86_64 
>> systems are on vm’s so they really should be a genx86_vm board type?
>> 
>> Sorry for the lots of questions. Thanks all.
>> 
>> Regards
>> Michael Knill
> 
> Hi Michael,
> 
> short answers to 3. + 4.:
> 
> 3. it depends on the "ver" file in the repo folder which contains the 
> (latest) version. E.g. "astlinux-1.3.7.1".
> 
> 4. You can switch on the commandline between genx86_64 and genx86_64-vm (but 
> not between serial and vga):
> 
>    https://doc.astlinux.org/devdoc:devdoc_switch_genx86_64_and_vm
> 
> 
> Michael

+1 and for completeness I'll add this link:

Create a Private Repository
https://doc.astlinux-project.org/devdoc:devdoc_create_repository

Michael (Knill), you mentioned you are not building your own images (yet), so 
that begs the question ... how are you generating custom images for your 
private repository ?

Lonnie




_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to 
pay...@krisk.org.

Reply via email to