Hi Michael, I have not experienced anything like that, WireGuard connectivity is rock solid for me.
I don't recall later WireGuard versions having any fixes for what you are describing. Just guessing, the standard MTU for WG is 1420 (1500-80), if you have a PPPoE connection with a MTU of 1492 you might try setting the WG MTU to 1412 (1500-8-80) or lower to test. I'm testing a 4G-LTE/5G fixed wireless internet service from T-Mobile, they use Carrier Grade NAT (CGNAT) for IPv4 which lowers the MTU to 1420 (just like WG) so WG needs a MTU setting of 1340 to work over the CGNAT or else it hangs. Lonnie > On Mar 19, 2021, at 3:42 PM, Michael Knill > <michael.kn...@ipcsolutions.com.au> wrote: > > Hi Group > > Not sure if anyone else is experiencing this. I'm on 1.3.10 and all my > systems connect via Wireguard VPN to both my softswitches. > Its generally all pretty stable but occasionally one of the VPN’s will be > disconnected and I have tried everything I can think of to bring it back up > but only a reboot has managed to do so at this stage. > Any ideas? > > Regards > Michael Knill > _______________________________________________ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > pay...@krisk.org. _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
