> Am 04.11.2023 um 18:16 schrieb Lonnie Abelbeck <li...@lonnie.abelbeck.com>:
>
>>
>> On Nov 4, 2023, at 11:12 AM, Gerard van Til <gerardvan...@gmail.com> wrote:
>>
>> Goodafternoon,
>>
>> I just upgraded my AstLinux using the UI, but after rebooting, my eth0 seems
>> to be gone, so I have no internet access anymore. Luckily, this AstLinux is
>> running on a virtual machine under Windows Hyper-V, and I can access it
>> using the Hyper-V manager. I can login with the root user, and should be
>> able to enter commands. If anyone can help me with the Linux commands to
>> restore this box to its previous version before the upgrade, that would be
>> great!
>>
>> Regards;
>> Gerard / Netherlands
>
> Hi Gerard,
>
> First answering your last question, to revert back to the pervious version,
> simply:
>
> System tab -> System Firmware Upgrade: [ Revert to Previous ] - { Firmware }
> - _x_ Confirm
>
> System tab -> Reboot/Restart System: [ Now ] - { Reboot } - _x_ Confirm
>
>
> Before you do that, let's try to understand the issue.
>
> Are you at the latest AstLinux 1.5.1 ?
>
> What is the output of:
> --
> lscpu | grep -i '^hypervisor vendor:'
> --
>
> What is the output of:
> --
> lsmod
> --
>
>
> Sadly I have no way to test Hyper-V, so your help is appreciated.
>
> Lonnie
If you cannot access the GUI, the same can be done from the command line:
Check installed versions:
--
upgrade-run-image show
--
Revert to former version:
--
upgrade-run-image revert
reboot
--
Good luck
Michael
http://www.mksolutions.info
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.