Hi Gerard, AstLinux Hyper-V support [1] needs a Board Type of "genx86_64-vm", so check by typing "cat /proc/cmdline" in the CLI and look for the string " astlinux=genx86_64-vm " as that is what you want. If you only have the string " astlinux=genx86_64 " then that is the issue.
The (non-VM) Board Type of "genx86_64" may have been able to run Hyper-V at some point, you really need a Board Type of "genx86_64-vm". The VM version has specific hv_netvsc and hv_utils modules that support Hyper-V virtual IO drivers. Note, your upgrade did not change the board type, so you can test the above with the old astlinux-1.3.8 version. Let us know if this is the issue, before any more diagnosis. Lonnie [1] https://doc.astlinux-project.org/userdoc:guest_vm_hyperv > On Nov 4, 2023, at 3:27 PM, Gerard van Til <gerardvan...@gmail.com> wrote: > > Thanks Michael and Lonnie (I already hoped to receive answers from both of > you :-)). > > @Lonnie: unfortunately, I cannot access the GUI anymore, so we'll have to > deal with Linux commands > I entered the commands you asked for, and because I have console-only access, > I'll have to send the answers as screenshot: > > <image.png> > > @Michael: "upgrade-run-image show" shows me that I upgraded from 1.3.8 to > 1.4.4. > Current version is: astlinux-1.4.4 > Previous saved version is: astlinux-1.3.8 > > I did a revert using the second command Michael provided, and that worked: > the system is back again. Thanks! > I created a snapshot of this machine before the revert, so we can investigate > further what happened if you want. But I guess I can reproduce this behaviour > by upgrading again. > The (virtual) network adapter in this machine is a legacy one according to > Hyper-V: "Realtek PCIe GBE Family controller". Maybe that is related to the > issue? > > Thanks both! > Regards; > Gerard > > Op za 4 nov 2023 om 18:32 schreef Michael Keuter <li...@mksolutions.info>: > > > > Am 04.11.2023 um 18:16 schrieb Lonnie Abelbeck <li...@lonnie.abelbeck.com>: > > > >> > >> On Nov 4, 2023, at 11:12 AM, Gerard van Til <gerardvan...@gmail.com> wrote: > >> > >> Goodafternoon, > >> > >> I just upgraded my AstLinux using the UI, but after rebooting, my eth0 > >> seems to be gone, so I have no internet access anymore. Luckily, this > >> AstLinux is running on a virtual machine under Windows Hyper-V, and I can > >> access it using the Hyper-V manager. I can login with the root user, and > >> should be able to enter commands. If anyone can help me with the Linux > >> commands to restore this box to its previous version before the upgrade, > >> that would be great! > >> > >> Regards; > >> Gerard / Netherlands > > > > Hi Gerard, > > > > First answering your last question, to revert back to the pervious version, > > simply: > > > > System tab -> System Firmware Upgrade: [ Revert to Previous ] - { Firmware > > } - _x_ Confirm > > > > System tab -> Reboot/Restart System: [ Now ] - { Reboot } - _x_ Confirm > > > > > > Before you do that, let's try to understand the issue. > > > > Are you at the latest AstLinux 1.5.1 ? > > > > What is the output of: > > -- > > lscpu | grep -i '^hypervisor vendor:' > > -- > > > > What is the output of: > > -- > > lsmod > > -- > > > > > > Sadly I have no way to test Hyper-V, so your help is appreciated. > > > > Lonnie > > If you cannot access the GUI, the same can be done from the command line: > > Check installed versions: > > -- > upgrade-run-image show > -- > > Revert to former version: > > -- > upgrade-run-image revert > reboot > -- > > Good luck > > Michael > > http://www.mksolutions.info > > > > > > _______________________________________________ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > pay...@krisk.org. > _______________________________________________ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > pay...@krisk.org. _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
