Hi Lonnie,

thanks, that trick helped - I'm now on
"astlinux-1.5.3 x86_64 - Asterisk 18.20.2".

Good news: My simple configuration survived the upgrade: I can still make and 
receive phone calls, voicemals are still
accepted an sent by email.

I am no Asterisk expert at all so need some advice on the remaining errors and 
warnings, full boot log:

Mar 22 14:27:11] Asterisk 18.20.2 built by build @ build on a x86_64 running 
Linux on 2024-01-30 17:27:01 UTC
[Mar 22 14:27:11] NOTICE[534] loader.c: 349 modules will be loaded.
[Mar 22 14:27:13] NOTICE[534] res_odbc.c: Registered ODBC class 'asterisk' 
dsn->[asterisk]
[Mar 22 14:27:13] NOTICE[534] res_odbc.c: Registered ODBC class 'asterisk-cdr' 
dsn->[asterisk-cdr]
[Mar 22 14:27:13] NOTICE[534] cdr.c: CDR simple logging enabled.
[Mar 22 14:27:13] NOTICE[534] dnsmgr.c: Managed DNS entries will be refreshed 
every 30 seconds.
[Mar 22 14:27:13] NOTICE[534] indications.c: Default country for indication 
tones: us
[Mar 22 14:27:13] NOTICE[534] indications.c: Setting default indication country 
to 'us'
[Mar 22 14:27:14] WARNING[534] res_musiconhold.c: No music on hold classes 
configured, disabling music on hold.
[Mar 22 14:27:14] NOTICE[534] res_smdi.c: No SMDI interfaces are available to 
listen on, not starting SMDI listener.
[Mar 22 14:27:14] WARNING[534] res_phoneprov.c: Unable to find a valid server 
address or name.
[Mar 22 14:27:14] ERROR[534] res_sorcery_config.c: Unable to load config file 
'aeap.conf'
[Mar 22 14:27:14] NOTICE[534] chan_skinny.c: Configuring skinny from skinny.conf
[Mar 22 14:27:14] NOTICE[692] chan_sip.c: Peer '6003' is now Reachable. (28ms / 
2000ms)
[Mar 22 14:27:14] NOTICE[534] chan_dahdi.c: Ignoring any changes to 'userbase' 
(on reload) at line 23.
[Mar 22 14:27:14] NOTICE[534] chan_dahdi.c: Ignoring any changes to 'vmsecret' 
(on reload) at line 31.
[Mar 22 14:27:14] NOTICE[534] chan_dahdi.c: Ignoring any changes to 'hassip' 
(on reload) at line 35.
[Mar 22 14:27:14] NOTICE[534] chan_dahdi.c: Ignoring any changes to 'hasiax' 
(on reload) at line 39.
[Mar 22 14:27:14] NOTICE[534] chan_dahdi.c: Ignoring any changes to 
'hasmanager' (on reload) at line 47.
[Mar 22 14:27:14] NOTICE[692] chan_sip.c: Peer '6002' is now Reachable. (25ms / 
2000ms)
[Mar 22 14:27:14] ERROR[534] ari/config.c: No configured users for ARI
[Mar 22 14:27:15] NOTICE[534] confbridge/conf_config_parser.c: Adding 
default_menu menu to app_confbridge
[Mar 22 14:27:15] NOTICE[692] chan_sip.c: Peer 'sipgate_de' is now Reachable. 
(31ms / 2000ms)
[Mar 22 14:27:15] NOTICE[692] chan_sip.c: Peer 'telekom' is now Reachable. 
(51ms / 2000ms)
[Mar 22 14:27:15] NOTICE[534] cel_custom.c: No mappings found in 
cel_custom.conf. Not logging CEL to custom CSVs.
[Mar 22 14:27:15] ERROR[534] config_options.c: Unable to load config file 
'res_http_media_cache.conf'
[Mar 22 14:27:15] NOTICE[534] res_http_media_cache.c: Could not load 
res_http_media_cache config; using defaults
[Mar 22 14:27:16] ERROR[534] codec_dahdi.c: Failed to open 
/dev/dahdi/transcode: No such file or directory
[Mar 22 14:27:16] WARNING[534] app_voicemail.c: Setting 'maxmessage' has been 
deprecated in favor of 'maxsecs'.
[Mar 22 14:27:16] WARNING[534] app_voicemail.c: Setting 'minmessage' has been 
deprecated in favor of 'minsecs'.
[Mar 22 14:27:16] WARNING[534] app_voicemail.c: maxsilence should be less than 
minmessage or you may get empty messages
[Mar 22 14:27:16] WARNING[534] app_voicemail.c: Invalid max message greeting 
length
[Mar 22 14:27:16] WARNING[534] res_hep_rtcp.c: res_hep is disabled; declining 
module load
[Mar 22 14:27:16] ERROR[534] config_options.c: Unable to load config file 
'prometheus.conf'
[Mar 22 14:27:16] WARNING[534] res_hep_pjsip.c: res_hep is disabled; declining 
module load
[Mar 22 14:27:16] WARNING[534] loader.c: Some non-required modules failed to 
load.
[Mar 22 14:27:17] ERROR[534] loader.c: res_pjsip_transport_websocket declined 
to load.
[Mar 22 14:27:17] ERROR[534] loader.c: cel_sqlite3_custom declined to load.
[Mar 22 14:27:17] ERROR[534] loader.c: cdr_sqlite3_custom declined to load.
[Mar 22 14:27:17] ERROR[534] loader.c: res_hep_rtcp declined to load.
[Mar 22 14:27:17] ERROR[534] loader.c: res_prometheus declined to load.
[Mar 22 14:27:17] ERROR[534] loader.c: res_hep_pjsip declined to load.

I could fix:
loader.c: res_pjsip_transport_websocket declined to load.
by adding:
websocket_enabled = false
to /etc/asterisk/sip.conf [General] section.

Peter


On Fri, 2024-03-22 at 07:52 -0500, Lonnie Abelbeck wrote:
> Hi Peter,
> 
> What you need to do is first perform a "System tab -> "Revert to Previous"
> 
> 
> 
> Then (no need to reboot) perform an "Upgrade with New".
> 
> This will use your changed repository URL, and since the previous version is 
> different from the latest it will allow
> the upgrade.
> 
> Lonnie
> 
> 
> 
> > On Mar 22, 2024, at 7:10 AM, Dr. Peter Voigt <pvo...@uos.de> wrote:
> > 
> > Well, I have some time left and would like to upgrade to ast18.
> > 
> > I am currently on 1.5.3 of ast16se. I've just changed the repository URL
> > from https://mirror.astlinux-project.org/ast16se-firmware-1.x
> > to https://mirror.astlinux-project.org/ast18-firmware-1.x
> > and checked for new firmware (System -> System Firmware Upgrade:).
> > However: "You are running the newest available version: astlinux-1.5.3".
> > 
> > Can I upgrade the Asterisk version only, if there is also a new AstLinux 
> > release
> > available or what else might be wrong?
> > 
> > Peter
> > 
> > 
> > On Fri, 2023-11-17 at 15:03 -0600, Lonnie Abelbeck wrote:
> > > +1 what Michael said ... my thoughts.
> > > 
> > > Given, currently using ast16:
> > > 
> > > 1) If currently using chan_pjsip, migrate to ast18.
> > > 
> > > 2) If currently using dahdi (ex. pcie telephony card), migrate to ast18.
> > > 
> > > 3) Else next step, change the "ast16" to "ast16se", ex.
> > > --
> > > Prefs -> System & Staff Tab Options: Repository URL:
> > > https://mirror.astlinux-project.org/ast16se-firmware-1.x
> > > --
> > > This should be quick and painless and will give you the latest security 
> > > fixes
> > > in the packages with 1.5.2.
> > > 
> > > 3a) Consider migrating to "ast18" when you have time to research the
> > > differences and testing.
> > > 
> > > 
> > > Additionally, it is recommended any "ast13se" systems be migrated to at 
> > > least
> > > "ast16se".  Relatively painless, but still requires some research and 
> > > testing
> > > as with any version change of Asterisk.
> > > 
> > > 
> > > Lonnie
> > > 
> > > 
> > > 
> > > > On Nov 17, 2023, at 12:21 PM, Dr. Peter Voigt <pvo...@uos.de> wrote:
> > > > 
> > > > Hi Michael,
> > > > 
> > > > thanks for feedback. I will try the upgrade to ast18 as soon as I've 
> > > > some
> > > > time
> > > > left necessary to deal with obviously arising error messages and 
> > > > required
> > > > configuration changes. May be I'll have to contact the list again, if
> > > > something
> > > > goes wrong.
> > > > 
> > > > 
> > > > On Fri, 2023-11-17 at 19:06 +0100, Michael Keuter wrote:
> > > > > Hi Peter,
> > > > > 
> > > > > it is just a matter of changing the repository URL (you must run a 
> > > > > lower
> > > > > version).
> > > > > 
> > > > > I would suggest you choose ast18 cause Asterisk is EOL now. 
> > > > > 20 is not well tested yet, it runs fine for me though.
> > > > > There was much changed between 16 and 18 (a few missing new config 
> > > > > files
> > > > > =>
> > > > > error messages.)
> > > > > The originals are in "/stat/etc/asterisk/".
> > > > > 
> > > > > > Am 17.11.2023 um 18:21 schrieb Dr. Peter Voigt <pvo...@uos.de>:
> > > > > > 
> > > > > > I am currently on the ast16 branch and ask myself, if I should 
> > > > > > switch to
> > > > > > ast16se
> > > > > > or to one of the higher version branches ast18/ast20.
> > > > > > 
> > > > > > And another question: Is upgrading just a matter of changing the
> > > > > > repository
> > > > > > URL
> > > > > > according to
> > > > > > https://doc.astlinux-project.org/userdoc:tt_asterisk_upgrade_version
> > > > > > or will I have to adapt or re-create my Asterisk configuration?
> > > > > > 
> > > > > > Regards,
> > > > > > Peter
> > > > > > 
> > > > > > 
> > > > > > On Thu, 2023-11-16 at 07:33 -0600, Lonnie Abelbeck wrote:
> > > > > > > Announcing AstLinux Release: 1.5.2
> > > > > > > 
> > > > > > > More Info: AstLinux Project
> > > > > > > https://www.astlinux-project.org/
> > > > > > > 
> > > > > > > Changes to supported firmware builds:
> > > > > > > * Previous 'ast13se' and 'ast16' firmware branches are no longer
> > > > > > > updated.
> > > > > > > * New 'ast16se' firmware branch, Asterisk 16.x built --without-
> > > > > > > pjproject
> > > > > > > and -
> > > > > > > -without-dahdi
> > > > > > > * Previous 'ast18' firmware branch, Asterisk 18.x built --with-
> > > > > > > pjproject
> > > > > > > and -
> > > > > > > -with-dahdi
> > > > > > > * New 'ast20' firmware branch, Asterisk 20.x built 
> > > > > > > --with-pjproject
> > > > > > > and --
> > > > > > > with-dahdi
> > > > > > > 
> > > > > > > AstLinux 1.5.2 Highlights:
> > > > > > > * Asterisk Versions: 16.30.0, 18.20.0, 20.5.0
> > > > > > > 
> > > > > > > * Linux Kernel 5.10.197, security and bug fixes
> > > > > > > * RUNNIX, version bump to runnix-0.6.16
> > > > > > > * OpenSSL, version bump to 1.1.1w, security fixes: CVE-2023-3446, 
> > > > > > > CVE-
> > > > > > > 2023-
> > > > > > > 3817
> > > > > > > * libcurl (curl) version bump to 8.4.0, security fixes: CVE-2023-
> > > > > > > 38039,
> > > > > > > CVE-
> > > > > > > 2023-38545, CVE-2023-38546
> > > > > > > * LibreTLS, version bump to 3.8.1
> > > > > > > * libpng, version bump to 1.6.40
> > > > > > > * libsodium, version bump to 1.0.19
> > > > > > > * libxml2, version bump to 2.11.5
> > > > > > > * chrony, version bump to 4.4
> > > > > > > * ne, version bump to 3.3.3
> > > > > > > * msmtp, version bump to 1.8.25
> > > > > > > * netsnmp, version bump to 5.9.4
> > > > > > > * pjsip version bump to 2.13.1
> > > > > > > * screen, version 4.9.1, security fix: CVE-2023-24626
> > > > > > > * sqlite, version bump to 3.43.2
> > > > > > > * sqliteodbc, version bump to 0.99991
> > > > > > > * tiff, version bump to 4.6.0
> > > > > > > * unbound, version bump to 1.18.0
> > > > > > > * unixodbc, version bump to 2.3.12
> > > > > > > * vnStat, version bump to 2.11
> > > > > > > * zabbix, version bump to 4.0.50
> > > > > > > * Asterisk '16se' (stable edition) version 16.30.0 is the last
> > > > > > > Asterisk
> > > > > > > 16.x
> > > > > > > "Legacy" version, built --without-pjproject and --without-dahdi 
> > > > > > > * Package upgrades providing important security and bug fixes
> > > > > > > 
> > > > > > > Full ChangeLog:
> > > > > > > https://raw.githubusercontent.com/astlinux-project/astlinux/1.5.2/docs/ChangeLog.txt
> > > > > > > 
> > > > > > > All users are encouraged to upgrade, read the ChangeLog for the
> > > > > > > details.
> > > > > > > 
> > > > > > > AstLinux Team
> > > > > 
> > > > > Michael
> > > > > 
> > > > > http://www.mksolutions.info
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > _______________________________________________
> > > > > Astlinux-users mailing list
> > > > > Astlinux-users@lists.sourceforge.net
> > > > > https://lists.sourceforge.net/lists/listinfo/astlinux-users
> > > > > 
> > > > > Donations to support AstLinux are graciously accepted via PayPal to
> > > > > pay...@krisk.org.
> > > > 
> > > > 
> > > > _______________________________________________
> > > > Astlinux-users mailing list
> > > > Astlinux-users@lists.sourceforge.net
> > > > https://lists.sourceforge.net/lists/listinfo/astlinux-users
> > > > 
> > > > Donations to support AstLinux are graciously accepted via PayPal to
> > > > pay...@krisk.org.
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > Astlinux-users mailing list
> > > Astlinux-users@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/astlinux-users
> > > 
> > > Donations to support AstLinux are graciously accepted via PayPal to
> > > pay...@krisk.org.
> > 
> > 
> > _______________________________________________
> > Astlinux-users mailing list
> > Astlinux-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/astlinux-users
> > 
> > Donations to support AstLinux are graciously accepted via PayPal to 
> > pay...@krisk.org.
> 
> 
> _______________________________________________
> Astlinux-users mailing list
> Astlinux-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
> 
> Donations to support AstLinux are graciously accepted via PayPal to 
> pay...@krisk.org.


_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to 
pay...@krisk.org.

Reply via email to