Hi Peter,

some things have changed between 16 and 18, there are now a few new modules, 
that have no config files.
The 4 voicemail config changes could be adapted, but will still work as they 
are.

> Am 22.03.2024 um 14:59 schrieb Dr. Peter Voigt <pvo...@uos.de>:
> 
> Hi Lonnie,
> 
> thanks, that trick helped - I'm now on
> "astlinux-1.5.3 x86_64 - Asterisk 18.20.2".
> 
> Good news: My simple configuration survived the upgrade: I can still make and 
> receive phone calls, voicemals are still
> accepted an sent by email.
> 
> I am no Asterisk expert at all so need some advice on the remaining errors 
> and warnings, full boot log:
> 
> Mar 22 14:27:11] Asterisk 18.20.2 built by build @ build on a x86_64 running 
> Linux on 2024-01-30 17:27:01 UTC
> [Mar 22 14:27:11] NOTICE[534] loader.c: 349 modules will be loaded.
> [Mar 22 14:27:13] NOTICE[534] res_odbc.c: Registered ODBC class 'asterisk' 
> dsn->[asterisk]
> [Mar 22 14:27:13] NOTICE[534] res_odbc.c: Registered ODBC class 
> 'asterisk-cdr' dsn->[asterisk-cdr]
> [Mar 22 14:27:13] NOTICE[534] cdr.c: CDR simple logging enabled.
> [Mar 22 14:27:13] NOTICE[534] dnsmgr.c: Managed DNS entries will be refreshed 
> every 30 seconds.
> [Mar 22 14:27:13] NOTICE[534] indications.c: Default country for indication 
> tones: us
> [Mar 22 14:27:13] NOTICE[534] indications.c: Setting default indication 
> country to 'us'
> [Mar 22 14:27:14] WARNING[534] res_musiconhold.c: No music on hold classes 
> configured, disabling music on hold.
> [Mar 22 14:27:14] NOTICE[534] res_smdi.c: No SMDI interfaces are available to 
> listen on, not starting SMDI listener.
> [Mar 22 14:27:14] WARNING[534] res_phoneprov.c: Unable to find a valid server 
> address or name.
> [Mar 22 14:27:14] ERROR[534] res_sorcery_config.c: Unable to load config file 
> 'aeap.conf'
> [Mar 22 14:27:14] NOTICE[534] chan_skinny.c: Configuring skinny from 
> skinny.conf
> [Mar 22 14:27:14] NOTICE[692] chan_sip.c: Peer '6003' is now Reachable. (28ms 
> / 2000ms)
> [Mar 22 14:27:14] NOTICE[534] chan_dahdi.c: Ignoring any changes to 
> 'userbase' (on reload) at line 23.
> [Mar 22 14:27:14] NOTICE[534] chan_dahdi.c: Ignoring any changes to 
> 'vmsecret' (on reload) at line 31.
> [Mar 22 14:27:14] NOTICE[534] chan_dahdi.c: Ignoring any changes to 'hassip' 
> (on reload) at line 35.
> [Mar 22 14:27:14] NOTICE[534] chan_dahdi.c: Ignoring any changes to 'hasiax' 
> (on reload) at line 39.
> [Mar 22 14:27:14] NOTICE[534] chan_dahdi.c: Ignoring any changes to 
> 'hasmanager' (on reload) at line 47.
> [Mar 22 14:27:14] NOTICE[692] chan_sip.c: Peer '6002' is now Reachable. (25ms 
> / 2000ms)
> [Mar 22 14:27:14] ERROR[534] ari/config.c: No configured users for ARI
> [Mar 22 14:27:15] NOTICE[534] confbridge/conf_config_parser.c: Adding 
> default_menu menu to app_confbridge
> [Mar 22 14:27:15] NOTICE[692] chan_sip.c: Peer 'sipgate_de' is now Reachable. 
> (31ms / 2000ms)
> [Mar 22 14:27:15] NOTICE[692] chan_sip.c: Peer 'telekom' is now Reachable. 
> (51ms / 2000ms)
> [Mar 22 14:27:15] NOTICE[534] cel_custom.c: No mappings found in 
> cel_custom.conf. Not logging CEL to custom CSVs.
> [Mar 22 14:27:15] ERROR[534] config_options.c: Unable to load config file 
> 'res_http_media_cache.conf'
> [Mar 22 14:27:15] NOTICE[534] res_http_media_cache.c: Could not load 
> res_http_media_cache config; using defaults
> [Mar 22 14:27:16] ERROR[534] codec_dahdi.c: Failed to open 
> /dev/dahdi/transcode: No such file or directory
> [Mar 22 14:27:16] WARNING[534] app_voicemail.c: Setting 'maxmessage' has been 
> deprecated in favor of 'maxsecs'.
> [Mar 22 14:27:16] WARNING[534] app_voicemail.c: Setting 'minmessage' has been 
> deprecated in favor of 'minsecs'.
> [Mar 22 14:27:16] WARNING[534] app_voicemail.c: maxsilence should be less 
> than minmessage or you may get empty messages
> [Mar 22 14:27:16] WARNING[534] app_voicemail.c: Invalid max message greeting 
> length
> [Mar 22 14:27:16] WARNING[534] res_hep_rtcp.c: res_hep is disabled; declining 
> module load
> [Mar 22 14:27:16] ERROR[534] config_options.c: Unable to load config file 
> 'prometheus.conf'
> [Mar 22 14:27:16] WARNING[534] res_hep_pjsip.c: res_hep is disabled; 
> declining module load
> [Mar 22 14:27:16] WARNING[534] loader.c: Some non-required modules failed to 
> load.
> [Mar 22 14:27:17] ERROR[534] loader.c: res_pjsip_transport_websocket declined 
> to load.
> [Mar 22 14:27:17] ERROR[534] loader.c: cel_sqlite3_custom declined to load.
> [Mar 22 14:27:17] ERROR[534] loader.c: cdr_sqlite3_custom declined to load.
> [Mar 22 14:27:17] ERROR[534] loader.c: res_hep_rtcp declined to load.
> [Mar 22 14:27:17] ERROR[534] loader.c: res_prometheus declined to load.
> [Mar 22 14:27:17] ERROR[534] loader.c: res_hep_pjsip declined to load.
> 
> I could fix:
> loader.c: res_pjsip_transport_websocket declined to load.
> by adding:
> websocket_enabled = false
> to /etc/asterisk/sip.conf [General] section.
> 
> Peter
> 
> 
> On Fri, 2024-03-22 at 07:52 -0500, Lonnie Abelbeck wrote:
>> Hi Peter,
>> 
>> What you need to do is first perform a "System tab -> "Revert to Previous"
>> 
>> 
>> 
>> Then (no need to reboot) perform an "Upgrade with New".
>> 
>> This will use your changed repository URL, and since the previous version is 
>> different from the latest it will allow
>> the upgrade.
>> 
>> Lonnie
>> 
>> 
>> 
>>> On Mar 22, 2024, at 7:10 AM, Dr. Peter Voigt <pvo...@uos.de> wrote:
>>> 
>>> Well, I have some time left and would like to upgrade to ast18.
>>> 
>>> I am currently on 1.5.3 of ast16se. I've just changed the repository URL
>>> from https://mirror.astlinux-project.org/ast16se-firmware-1.x
>>> to https://mirror.astlinux-project.org/ast18-firmware-1.x
>>> and checked for new firmware (System -> System Firmware Upgrade:).
>>> However: "You are running the newest available version: astlinux-1.5.3".
>>> 
>>> Can I upgrade the Asterisk version only, if there is also a new AstLinux 
>>> release
>>> available or what else might be wrong?
>>> 
>>> Peter
>>> 
>>> 
>>> On Fri, 2023-11-17 at 15:03 -0600, Lonnie Abelbeck wrote:
>>>> +1 what Michael said ... my thoughts.
>>>> 
>>>> Given, currently using ast16:
>>>> 
>>>> 1) If currently using chan_pjsip, migrate to ast18.
>>>> 
>>>> 2) If currently using dahdi (ex. pcie telephony card), migrate to ast18.
>>>> 
>>>> 3) Else next step, change the "ast16" to "ast16se", ex.
>>>> --
>>>> Prefs -> System & Staff Tab Options: Repository URL:
>>>> https://mirror.astlinux-project.org/ast16se-firmware-1.x
>>>> --
>>>> This should be quick and painless and will give you the latest security 
>>>> fixes
>>>> in the packages with 1.5.2.
>>>> 
>>>> 3a) Consider migrating to "ast18" when you have time to research the
>>>> differences and testing.
>>>> 
>>>> 
>>>> Additionally, it is recommended any "ast13se" systems be migrated to at 
>>>> least
>>>> "ast16se".  Relatively painless, but still requires some research and 
>>>> testing
>>>> as with any version change of Asterisk.
>>>> 
>>>> 
>>>> Lonnie
>>>> 
>>>> 
>>>> 
>>>>> On Nov 17, 2023, at 12:21 PM, Dr. Peter Voigt <pvo...@uos.de> wrote:
>>>>> 
>>>>> Hi Michael,
>>>>> 
>>>>> thanks for feedback. I will try the upgrade to ast18 as soon as I've some
>>>>> time
>>>>> left necessary to deal with obviously arising error messages and required
>>>>> configuration changes. May be I'll have to contact the list again, if
>>>>> something
>>>>> goes wrong.
>>>>> 
>>>>> 
>>>>> On Fri, 2023-11-17 at 19:06 +0100, Michael Keuter wrote:
>>>>>> Hi Peter,
>>>>>> 
>>>>>> it is just a matter of changing the repository URL (you must run a lower
>>>>>> version).
>>>>>> 
>>>>>> I would suggest you choose ast18 cause Asterisk is EOL now. 
>>>>>> 20 is not well tested yet, it runs fine for me though.
>>>>>> There was much changed between 16 and 18 (a few missing new config files
>>>>>> =>
>>>>>> error messages.)
>>>>>> The originals are in "/stat/etc/asterisk/".
>>>>>> 
>>>>>>> Am 17.11.2023 um 18:21 schrieb Dr. Peter Voigt <pvo...@uos.de>:
>>>>>>> 
>>>>>>> I am currently on the ast16 branch and ask myself, if I should switch to
>>>>>>> ast16se
>>>>>>> or to one of the higher version branches ast18/ast20.
>>>>>>> 
>>>>>>> And another question: Is upgrading just a matter of changing the
>>>>>>> repository
>>>>>>> URL
>>>>>>> according to
>>>>>>> https://doc.astlinux-project.org/userdoc:tt_asterisk_upgrade_version
>>>>>>> or will I have to adapt or re-create my Asterisk configuration?
>>>>>>> 
>>>>>>> Regards,
>>>>>>> Peter
>>>>>>> 
>>>>>>> 
>>>>>>> On Thu, 2023-11-16 at 07:33 -0600, Lonnie Abelbeck wrote:
>>>>>>>> Announcing AstLinux Release: 1.5.2
>>>>>>>> 
>>>>>>>> More Info: AstLinux Project
>>>>>>>> https://www.astlinux-project.org/
>>>>>>>> 
>>>>>>>> Changes to supported firmware builds:
>>>>>>>> * Previous 'ast13se' and 'ast16' firmware branches are no longer
>>>>>>>> updated.
>>>>>>>> * New 'ast16se' firmware branch, Asterisk 16.x built --without-
>>>>>>>> pjproject
>>>>>>>> and -
>>>>>>>> -without-dahdi
>>>>>>>> * Previous 'ast18' firmware branch, Asterisk 18.x built --with-
>>>>>>>> pjproject
>>>>>>>> and -
>>>>>>>> -with-dahdi
>>>>>>>> * New 'ast20' firmware branch, Asterisk 20.x built --with-pjproject
>>>>>>>> and --
>>>>>>>> with-dahdi
>>>>>>>> 
>>>>>>>> AstLinux 1.5.2 Highlights:
>>>>>>>> * Asterisk Versions: 16.30.0, 18.20.0, 20.5.0
>>>>>>>> 
>>>>>>>> * Linux Kernel 5.10.197, security and bug fixes
>>>>>>>> * RUNNIX, version bump to runnix-0.6.16
>>>>>>>> * OpenSSL, version bump to 1.1.1w, security fixes: CVE-2023-3446, CVE-
>>>>>>>> 2023-
>>>>>>>> 3817
>>>>>>>> * libcurl (curl) version bump to 8.4.0, security fixes: CVE-2023-
>>>>>>>> 38039,
>>>>>>>> CVE-
>>>>>>>> 2023-38545, CVE-2023-38546
>>>>>>>> * LibreTLS, version bump to 3.8.1
>>>>>>>> * libpng, version bump to 1.6.40
>>>>>>>> * libsodium, version bump to 1.0.19
>>>>>>>> * libxml2, version bump to 2.11.5
>>>>>>>> * chrony, version bump to 4.4
>>>>>>>> * ne, version bump to 3.3.3
>>>>>>>> * msmtp, version bump to 1.8.25
>>>>>>>> * netsnmp, version bump to 5.9.4
>>>>>>>> * pjsip version bump to 2.13.1
>>>>>>>> * screen, version 4.9.1, security fix: CVE-2023-24626
>>>>>>>> * sqlite, version bump to 3.43.2
>>>>>>>> * sqliteodbc, version bump to 0.99991
>>>>>>>> * tiff, version bump to 4.6.0
>>>>>>>> * unbound, version bump to 1.18.0
>>>>>>>> * unixodbc, version bump to 2.3.12
>>>>>>>> * vnStat, version bump to 2.11
>>>>>>>> * zabbix, version bump to 4.0.50
>>>>>>>> * Asterisk '16se' (stable edition) version 16.30.0 is the last
>>>>>>>> Asterisk
>>>>>>>> 16.x
>>>>>>>> "Legacy" version, built --without-pjproject and --without-dahdi 
>>>>>>>> * Package upgrades providing important security and bug fixes
>>>>>>>> 
>>>>>>>> Full ChangeLog:
>>>>>>>> https://raw.githubusercontent.com/astlinux-project/astlinux/1.5.2/docs/ChangeLog.txt
>>>>>>>> 
>>>>>>>> All users are encouraged to upgrade, read the ChangeLog for the
>>>>>>>> details.
>>>>>>>> 
>>>>>>>> AstLinux Team
>>>>>> 
>>>>>> Michael
>>>>>> 
>>>>>> http://www.mksolutions.info


Michael

http://www.mksolutions.info





_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to 
pay...@krisk.org.

Reply via email to