On 4 February 2016 at 05:01, Ann Lo <[email protected]> wrote: > Hi, > > When we set up 80MHz channel between AP and client station, we use the > iw station dump command to get the "rx bitrate" of the client station. > We have noticed that not only the MCS changes, the NSS also changes. > Is it normal to have dynamic values of NSS when we do iperf using 80 > MHz channel? > > Some data on "rx bitrate" of the same client station is as follows: > > rx bitrate: 58.5 MBit/s VHT-MCS 1 80 MHz VHT-NSS 1 > rx bitrate: 702.0 MBit/s VHT-MCS 5 80MHz VHT-NSS 3 > > We use kernel 3.14.28 and WLE900VX.
Yes, this is normal. "rx bitrates" reports rate seen in most recent Rx-ed frame. Each frame can be transmitted at a different rate by stations. Michał _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
