Hi Michal, This is good to know.
Thanks, Ann On Wed, Feb 3, 2016 at 11:39 PM, Michal Kazior <[email protected]> wrote: > On 4 February 2016 at 05:01, Ann Lo <[email protected]> wrote: >> Hi, >> >> When we set up 80MHz channel between AP and client station, we use the >> iw station dump command to get the "rx bitrate" of the client station. >> We have noticed that not only the MCS changes, the NSS also changes. >> Is it normal to have dynamic values of NSS when we do iperf using 80 >> MHz channel? >> >> Some data on "rx bitrate" of the same client station is as follows: >> >> rx bitrate: 58.5 MBit/s VHT-MCS 1 80 MHz VHT-NSS 1 >> rx bitrate: 702.0 MBit/s VHT-MCS 5 80MHz VHT-NSS 3 >> >> We use kernel 3.14.28 and WLE900VX. > > Yes, this is normal. "rx bitrates" reports rate seen in most recent > Rx-ed frame. Each frame can be transmitted at a different rate by > stations. > > > Michał _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
