On 16 February 2016 at 15:33, Lindner, Frank <[email protected]> wrote: > Hi there, > > I'm using QCA980 hw2.0 (Compex WLE900VX5) in monitor mode. Using Linux Kernel > 4.3.3 and ath10k firmware 10.2.4.70.19-2. > When capturing 2.4 GHz WIFI operating in 802.11g (1 to 54 Mbit/s), Wireshark > displays only 1, 2, 5.5 or 11 Mbit/s as TX rate for the frames. When > capturing in parallel with Airpcap on Windows or a Ralink-based card in > monitor mode, frame TX rate is displayed correctly with 1 to 54 Mbit/s. > I also tried older firmware versions. Same issue. > Also when trying to capture with tcpdump, only up 11 Mbit/s is shown. > Is this a known issue? > Is there any fix for this?
https://wireless.wiki.kernel.org/en/users/drivers/ath10k#known_bugslimitations If you don't mind dirtying your hands with some C code you can try using the following patch (it will not cleanly apply to upstream kernel but should be fairly straightforward to port): https://groups.google.com/a/chromium.org/forum/#!topic/chromium-os-checkins/YGYm6gNUnEE Michał _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
