Hello Adrian, bug report can be found here <https://bugzilla.kernel.org/show_bug.cgi?id=112451#c10> I added other firmware files. I don't know any other place.
Tobias On Sun, Feb 21, 2016 at 11:25:52AM -0800, Adrian Chadd wrote: > ok, well, we should file a bug report so this isn't forgotten. > > Where's the right place to create bug reports? is there an ath10k > staging branch in github somewhere? or bugzilla.kernel.org ? > > > -a > > > On 21 February 2016 at 11:20, Tobias Predel <[email protected]> wrote: > > Yes. I confirm full functionality now. > > > > On Sun, Feb 21, 2016 at 10:33:26AM -0800, Adrian Chadd wrote: > >> Right, so just to be clear - it's just the board file updates that > >> make it all work fine? > >> > >> > >> -a > >> > >> > >> On 21 February 2016 at 06:44, Tobias Predel <[email protected]> > >> wrote: > >> > Hello again, > >> > > >> > one last word about the the board files: > >> > > >> > I extracted the board files from an AsusTek Windows Driver installer > >> > that included the Qualcomm driver files for diverse variants of QCA9377 > >> > built in Samsung, Asus (Askey), Acer, Lenovo notebooks. > >> > > >> > An archive with all these files can be found at the comment 10 of my bug > >> > report > >> > <https://bugzilla.kernel.org/show_bug.cgi?id=112451#c10> > >> > including board files (eeprom_*.bin) for NFA425, NFA435 (A), NFA455. > >> > > >> > If some people experience trouble, those might look at the netathr10x.inf > >> > to find out which eeprom board file is needed or try out by installing > >> > it to /lib/firmware/ath10k/QCA9377/hw1.0/board.bin. > >> > > >> > Those board files are using api 1 and must be named board.bin. > >> > firmware-5.bin is still to be pulled from kvalo's github repo. > >> > > >> > Thank you to all for your support. I wish the best! > >> > > >> > Tobias > >> > > >> > > >> > On Fri, Feb 19, 2016 at 05:55:26PM +0000, Hsu, Ryan wrote: > >> >> Glad that help! > >> >> > >> >> I've cc that file to Kalle, hope we can see that get merged soon. > >> >> > >> >> Ryan > >> >> > >> >> > -----Original Message----- > >> >> > From: Tobias Predel [mailto:[email protected]] > >> >> > Sent: Friday, February 19, 2016 09:23 AM > >> >> > To: Adrian Chadd > >> >> > Cc: Hsu, Ryan; [email protected]; vagner_ > >> >> > Subject: Re: ath10k and QCA3977 - random transfer rate losses > >> >> > > >> >> > On Fri, Feb 19, 2016 at 08:07:49AM -0800, Adrian Chadd wrote: > >> >> > > Ok, so it's a board file problem? this can be solved by telling > >> >> > > kvalo@ > >> >> > > about it, right? > >> >> > > > >> >> > > > >> >> > > -a > >> >> > > >> >> > Yes, they differ and the board-2.bin file isn't included neither in > >> >> > linux- > >> >> > firmware nor in kvalo's repository. > >> >> > > >> >> > MD5 checksums: > >> >> > 73cca12b9398f0cecaa3cfa35c8961b7 board-2.bin > >> >> > 44349f6ae93cf9ceffb164f58d4fb124 board.bin > >> >> > > >> >> > I'll try to contact him and send the board file. > >> >> > > >> >> > Tobias _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
