Hi Tobias,
Do you think that aplying the right board.bin makes the Bluetooth work
properly?
My wireless card
Network controller: Qualcomm Atheros Device 0042 (rev 30)
Has got bluethooth capabilities, but does not work. On boot time it
complains about a file called ranpatch (...).bin related to it :(
++++++++++++++++++++++++++++++++++++++++++
On 02/21/2016 11:54 PM, Tobias Predel wrote:
Hello Adrian,
bug report can be found here
<https://bugzilla.kernel.org/show_bug.cgi?id=112451#c10>
I added other firmware files. I don't know any other place.
Tobias
On Sun, Feb 21, 2016 at 11:25:52AM -0800, Adrian Chadd wrote:
ok, well, we should file a bug report so this isn't forgotten.
Where's the right place to create bug reports? is there an ath10k
staging branch in github somewhere? or bugzilla.kernel.org ?
-a
On 21 February 2016 at 11:20, Tobias Predel <[email protected]> wrote:
Yes. I confirm full functionality now.
On Sun, Feb 21, 2016 at 10:33:26AM -0800, Adrian Chadd wrote:
Right, so just to be clear - it's just the board file updates that
make it all work fine?
-a
On 21 February 2016 at 06:44, Tobias Predel <[email protected]> wrote:
Hello again,
one last word about the the board files:
I extracted the board files from an AsusTek Windows Driver installer
that included the Qualcomm driver files for diverse variants of QCA9377
built in Samsung, Asus (Askey), Acer, Lenovo notebooks.
An archive with all these files can be found at the comment 10 of my bug report
<https://bugzilla.kernel.org/show_bug.cgi?id=112451#c10>
including board files (eeprom_*.bin) for NFA425, NFA435 (A), NFA455.
If some people experience trouble, those might look at the netathr10x.inf
to find out which eeprom board file is needed or try out by installing
it to /lib/firmware/ath10k/QCA9377/hw1.0/board.bin.
Those board files are using api 1 and must be named board.bin.
firmware-5.bin is still to be pulled from kvalo's github repo.
Thank you to all for your support. I wish the best!
Tobias
On Fri, Feb 19, 2016 at 05:55:26PM +0000, Hsu, Ryan wrote:
Glad that help!
I've cc that file to Kalle, hope we can see that get merged soon.
Ryan
-----Original Message-----
From: Tobias Predel [mailto:[email protected]]
Sent: Friday, February 19, 2016 09:23 AM
To: Adrian Chadd
Cc: Hsu, Ryan; [email protected]; vagner_
Subject: Re: ath10k and QCA3977 - random transfer rate losses
On Fri, Feb 19, 2016 at 08:07:49AM -0800, Adrian Chadd wrote:
Ok, so it's a board file problem? this can be solved by telling kvalo@
about it, right?
-a
Yes, they differ and the board-2.bin file isn't included neither in linux-
firmware nor in kvalo's repository.
MD5 checksums:
73cca12b9398f0cecaa3cfa35c8961b7 board-2.bin
44349f6ae93cf9ceffb164f58d4fb124 board.bin
I'll try to contact him and send the board file.
Tobias
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
