Am 13.04.2016 um 19:05 schrieb Alexis Green:
How about only ignoring the error only if there's caldata. Could be a
good middle ground.
This is a patch I submitted to OpenWRT a while ago as part of Netgear
X4 support -
https://patchwork.ozlabs.org/patch/601352/
even then its not clear if this function ever worked. you say it happend
on a I7 system. so a device without caldata on local flash memory
On Wed, Apr 13, 2016 at 8:36 AM, Ben Greear <[email protected]> wrote:
On 11/19/2015 10:21 AM, Sebastian Gottschall wrote:
simple solution.
as for ath9k. otp must be ignored for various chipsets, since they wont
return valid results
--- core.c (Revision 2702)
+++ core.c (Arbeitskopie)
@@ -1735,9 +1735,8 @@
ret = ath10k_core_get_board_id_from_otp(ar);
if (ret && ret != -EOPNOTSUPP) {
- ath10k_err(ar, "failed to get board id from otp for qca99x0: %d\n",
+ ath10k_err(ar, "failed to get board id from otp for qca99x0: %d,
ignore\n",
ret);
- return ret;
}
ret = ath10k_core_fetch_board_file(ar);
I received a report of the same problem reported below from someone using an
i7 processor
on some random motherboard.
Same NIC, kernel, and firmware works fine on my systems, so it appears to be
platform
dependent somehow.
Did you find a better solution other than just ignoring the OTP failure?
Thanks,
Ben
Am 19.11.2015 um 18:12 schrieb Sebastian Gottschall:
Am 19.11.2015 um 17:13 schrieb Ben Greear:
git clone git://dmz2.candelatech.com/linux.ath
same effect with yours
6.201141] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 6.201593] ath10k_pci 0000:01:00.0: pci irq legacy interrupts 0
irq_mode 0 reset_mode 0
[ 8.578573] ath10k_pci 0000:01:00.0: unable to read from the device
[ 8.578605] ath10k_pci 0000:01:00.0: could not execute otp for board
id check: -110
[ 8.583648] ath10k_pci 0000:01:00.0: failed to get board id from otp
for qca99x0: -110
[ 8.591338] ath10k_pci 0000:01:00.0: could not probe fw (-110)
[ 8.600062] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 8.605600] ath10k_pci 0001:01:00.0: pci irq legacy interrupts 0
irq_mode 0 reset_mode 0
[ 10.798574] ath10k_pci 0001:01:00.0: unable to read from the device
[ 10.798598] ath10k_pci 0001:01:00.0: could not execute otp for board
id check: -110
[ 10.803644] ath10k_pci 0001:01:00.0: failed to get board id from otp
for qca99x0: -110
[ 10.811346] ath10k_pci 0001:01:00.0: could not probe fw (-110)
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
