Hi, I want to use Compex WLE1216-V2 20 modules. This is the 2.4 GHz module of the QCA9984. It seems, that I need a board.bin instead of typical board-2.bn for QCA9984 5 GHz version. The card is requesting “bus=pci,bmi-chip-id=0,bmi-board-id=30”. I found a board.bin file, that’s get loaded by the driver, but this pushed 5 GHz channels to the card, which might not work. Even than I can not set to 2.4 GHz channels, cause iw phy info it tells me only 5 GHz channel support. Where can I download the correct board.bin and, if needed, the firmware-x.bin file? Any ideas?
Thanks a lot in advance. Best regards, Frank Vorstandsvorsitzender: Dipl.-Ing. Dirk Wilhelm Aufsichtsratsvorsitzender: Dr.-Ing. Peter Hasse Handelsregister: HRB Saarbrücken Nr. 13201 Ust.ID Nr.: DE 153807627 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
