Hi, In my AP , there are two radios, one ath9k based module WLE200NX and second ath10k based WLE600VX.
I configured both the radios as AP in IEEE 802.11a 40 MHz HT mode and performed throughput test. Measured throughput with ath9k is 164Mbps while with ath10k it is 137Mbps. I could not understand the reason of this drop(27 Mbps)? My test setup was inside RF-Shield. There was no interference and system was associated at 300Mbps in both cases. ath10k driver was taken from ath10k git and firmware version is firmware-5.bin_10.2.4.70.66. ath9k drives was taken from stable backport release backport-4.4.2-1. kernel version : 3.12 openwrt version : Chaos Calmer 15.05.0 Please suggest me how can I increase the throughput of my AP. Thanks & Regards, कविता माथुर Kavita Mathur वरिष्ठ अनुसंधान अभियंता Senior Research Engineer सी-डॉट C-DOT इलैक्ट्रॉनिक्स सिटी फेज़ I Electronics City Phase I होसूर रोड, बेंगलूरु Hosur Road, Bengaluru – 560100 फोन Ph 080-28529896 Disclaimer: ---------- This email and any files transmitted with it _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
