On 12/10/2018 08:56 PM, Pradeep Kumar Chitrapu wrote:
> From: Pradeep kumar Chitrapu <[email protected]>
>
> Invalid rate code is sent to firmware when multicast rate value of 0 is
> sent to driver indicating disabled case, causing broken mesh path.
> so fix that.
>
> Tested on QCA9984 with firmware 10.4-3.6.1-00827
>
Test data is too small. You need to provide at least QCA9880 and QCA4019
data together which share ath10k for mesh.
Thanks,
Peter
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
