Hi, For the questions from the wiki page:
* description for what hardware this is:
- it is a IPQ4018 based board (AP-DK01.1-C2)
- one QCA40xx radio is used as 2.4GHz radio
- one QCA40xx radio is used as 5GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- The board file(s) where extracted from the Linksys firmware. From
the image, there are a total of 8 folders: AH, AP, AU, EU, FCC,
hw_1, IC and PH.
- The files in this email are:
* hw_1/boardData_1_0_IPQ4019_DK01_2G.bin
* hw_1/boardData_1_0_IPQ4019_DK01_5G.bin
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=linksys-ea6350v3
md5sum:
90d40a9be7d3417e728f73867b553e1e
+ bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=linksys-ea6350v3
md5sum:
00925c47ea090b1e51b748376a40a3aa
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
Oever González
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=linksys-ea6350v3.bin
Description: application/macbinary
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=linksys-ea6350v3.bin
Description: application/macbinary
_______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
