Oever González <[email protected]> writes: > For the questions from the wiki page: > > * description for what hardware this is: > > - it is a IPQ4018 based board (AP-DK01.1-C2) > - one QCA40xx radio is used as 2.4GHz radio > - one QCA40xx radio is used as 5GHz radio > > * origin of the board file (did you create it yourself or where you > downloaded) > > - The board file(s) where extracted from the Linksys firmware. From > the image, there are a total of 8 folders: AH, AP, AU, EU, FCC, > hw_1, IC and PH. > - The files in this email are: > * hw_1/boardData_1_0_IPQ4019_DK01_2G.bin > * hw_1/boardData_1_0_IPQ4019_DK01_5G.bin > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - QCA4019 hw1.0 > > + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=linksys-ea6350v3 > md5sum: > 90d40a9be7d3417e728f73867b553e1e > + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=linksys-ea6350v3 > md5sum: > 00925c47ea090b1e51b748376a40a3aa > > * attach the actual board file (board.bin) > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin")
I'm dropping this and instead using the versions sent on February. -- Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
